Front Suspension And Steering

Trident 750/900

Top Fork Yoke Nut Polished Stainless Steel
( S029 )

Stainless steel polished top fork yoke nut. Replaces Triumph part number 2040060-T0301.

Fits: Adventurer, America, Bonneville 800/865, T100, SE, Daytona 750/900/1000/1200, Legend TT, Rocket III, Classic, Roadster, Touring, Speed Four, Speed Triple 750/900, Speedmaster, Sprint 900, Sprint Executive, Sprint Sport, Sprint ST 955, Sprnt RS 955, Thruxton 900, Thunderbird 900, Thunderbird Sport, Tiger 900 carb and EFI, Tiger 955, Trident 750/900, Trophy 900/1200 and TT600.  



£19.95
More info  

Replacement chromed fork tubes to fit most models
( S063 )

Replacement front fork tubes available for the models listed.  Internal tube components need swapping from original to replacement tubes which involves grinding the end of the original tube.. Triumph have used Kayaba and Showa as suppliers for forks. We stock seals and fork bushes. State model and vin number when ordering please. Popular models in stock, others to order. New fork bushes need fitting when fitting new tubes as the original bushes can get distorted taking the forks apart. Price per tube. Made in UK.





£99.00
More info  

Trident/Trophy/Sprint 900 Multirate Kayaba uprated fork springs.
( S065 )

Silicon chrome progressively wound 20% uprated front fork springs to fit Trident, 900 Sprint and Trophy models. These transform the handling of early models which suffer with excessive fork dive. Made for 43mm Kayaba forks, these have been successfully fitted to other models not listed here with 43mm forks, if you are prepared to adjust the preload spacer length.  Approximate overall length 475mm. Please state model of bike and vin number when ordering. Priced per pair

These fit all Sprint 900 (not Sprint Sport with adjustable forks), all Sprint Executive, Trident 750 and 900 up to VIN 44301, all Trophy up to VIN 42274. Will also fit all Trophy from VIN 96152 to VIN 98479.

 

 



£65.00
More info  

Trident/Trophy/Sprint 900 Multirate Showa uprated fork springs.
( S066 )

Silicon chrome progressively wound 10% uprated front fork springs to fit Trident, 900 Sprint and Trophy models. These transform the handling of early models which suffer with excessive fork dive. Made for 43mm Showa forks, these have been successfully fitted to other models with 43mm forks, if you are prepared to adjust the preload spacer length.  Approximate overall length 495mm. Please state model of bike and vin number when ordering. Priced per pair.



£65.00
More info  

Steering head bearing set.
( S304 )

Koyo taper roller bearings top and bottom with built in seals.

Fits all models up to vin 43916. These are all early steel frames.

Tiger 900,Thunderbird 900, 750/900 Trident, 750/900/1000/1200 Daytona, Sprint 900, 750/900 Speed Triple and 900/1200 Trophy.

Also fits Rocket 3 Classic, Touring and Roadster.



£29.00
More info  

Steering head bearing set.
( S305 )

Koyo taper roller lower and circlip ballrace upper bearing with built in seals.To fit all 750/900/1200 steel frame models after vin number 43916 and 900/955 injected Tiger models. After vin number 43916 fits, Thunderbird 900, Thunderbird Sport, Legend, Adventurer, 750/900 Trident, Sprint 900, Sprint Sport, Sprint Executive, 900/1200 Trophy, 900/1200 Daytona, 900 Tiger...

£25.00
More info  

Replacement fork seals (priced per pair)
( S501 )

43 mm fork seals to fit Kayaba forks. These are very high quality seals, now with sprung lips on both the top and bottom of the each seal (see picture 2). .This style of seal is used on most original equipment high end front suspension legs now. The extra spring on the outer side of the seal mimimises the risk of road debris entering and damaging the inner oil seal section. Triumph for their 43 mm forks have used both Kayaba (55 mm outer diameter seal) and Showa (54 mm outer diameter seal) as their fork suppliers. If in doubt just state the model of bike and VIN number when ordering. These fit Trident 750/900, Trophy 900/1200, all Sprint 900, all Daytona 750/900/1000/1200, all Sprint Sport, all Sprint Executive, all 750/900 Speed Triple, Thunderbird Sport,

Fit Thunderbird and Adventurer up to VIN43509. Will also fit Thunderbird, Adventurer and Legend after VIN 92814.

Fit Trophy up to VIN 42274. Will also fit Trophy from VIN 96152 to VIN 98479.

Fit Trident up to VIN 44301.

Fit Tiger 900 (carburettor model) up to VIN 43523



£10.95
More info  

Fork dust seals Kayaba 43 mm forks
( S508 )

Dust seal to fit most early carburettor models. 43 mm fok tube and 55 mm internal fork slider size. Sold as a pair.

Check before ordering as both Showa and Kayaba forks have been used on the same models. Fits 750/900 Trident, early 900/1200 Trophy, 900 Sprint, 900 Thunderbird, legend.



£12.95
More info  

Dust seals (Kayaba) with integral fork tube shield
( S509 )

Fork dust seal with integral flexible fork tube protector to fit Kayaba forks. 43 mm fok tube and 55 mm internal fork slider size. Sold as a pair.

Check before ordering as both Showa and Kayaba forks have been used on the same models. Fits 750/900 Trident, early 900/1200 Trophy, 900 Sprint, 900 Thunderbird, Legend.



£12.95
More info  

Fork dust seals Showa 43 mm forks
( S514 )

43mm fork tube size dust seals to fit Showa forks (with 54 mm fitting in fork). These all have a garter style spring visible. Sold as a pair. Fits Showa forks on:

Sprint ST 955, all Sprint RS and all Sprint ST 1050, Tiger 800, XC, XCA, XCx, XR, XRT, XRx, Tiger 1050, Tiger Sport, Speed Triple 1050 up to VIN 461331

They also fit (please check VIN numbers) Trophy900/1200, Trident, Adventurer, Thunderburd, Legend TT,  



£12.95
More info  

Dust seals (Showa) with integral fork tube shield
( S515 )

43mm fork tube size dust seals to fit Showa forks (with 54 mm fitting in fork) with built in fork tube protector. Sold as a pair.



£12.95
More info  

Fork Dust Seals, 45mm Showa forks.
( S516 )

Dust seal to fit 45mm Daytona T595, Daytona 955, Speed Triple T509 and 955. Sold in pairs.



£12.95
More info  

Fork bush set Showa
( S616 )

Fork bush set for 43 mm Showa forks. Check before before ordering you have Showa forks. Showa forks use 15mm wide (actually 14.85mm) bottom bushes and are fitted with a dust seal with a spring showing around the sealing lip. Another important identifying feature is the outside size of the oil and dust seals which is 54 mm. The kit consists of 4 bushes.

Adventurer, Legend, Sprint RS, Sprint ST 955, Sprint ST 1050, Sprint GT, Trident 750/900, Trophy 900/1200, Thunderbird 900



£36.00
More info