Speed Triple 750/900
Stainless steel polished top fork yoke nut. Replaces Triumph part number 2040060-T0301.
Fits: Adventurer, America, Bonneville 800/865, T100, SE, Daytona 750/900/1000/1200, Legend TT, Rocket III, Classic, Roadster, Touring, Speed Four, Speed Triple 750/900, Speedmaster, Sprint 900, Sprint Executive, Sprint Sport, Sprint ST 955, Sprnt RS 955, Thruxton 900, Thunderbird 900, Thunderbird Sport, Tiger 900 carb and EFI, Tiger 955, Trident 750/900, Trophy 900/1200 and TT600.
Ready to fit original equipment quality front fork tubes to fit only Daytona 750/900/1000/1200, Speed Triple 750/900, and Sprint Sport. Check fork overall length from top nut to spindle centre is approximately 81 cm or 78 mm, but it's better to diassemble the forks and check the fork tube length is either 630 mm or 610 mm. Price per tube
Silicon chrome progressively wound 10% uprated front fork springs. Length: 423 mm. Priced per pair
Fits Sprint Sport, Daytona Super 3, Daytona 900/1200 up to vin 36445 and Speed Triple 900 up to vin 29155.
Koyo taper roller bearings top and bottom with built in seals.
Fits all models up to vin 43916. These are all early steel frames.
Tiger 900,Thunderbird 900, 750/900 Trident, 750/900/1000/1200 Daytona, Sprint 900, 750/900 Speed Triple and 900/1200 Trophy.
Also fits Rocket 3 Classic, Touring and Roadster.
43 mm fork seals to fit Kayaba forks. These are very high quality seals, now with sprung lips on both the top and bottom of the each seal (see picture 2). .This style of seal is used on most original equipment high end front suspension legs now. The extra spring on the outer side of the seal mimimises the risk of road debris entering and damaging the inner oil seal section. Triumph for their 43 mm forks have used both Kayaba (55 mm outer diameter seal) and Showa (54 mm outer diameter seal) as their fork suppliers. If in doubt just state the model of bike and VIN number when ordering. These fit Trident 750/900, Trophy 900/1200, all Sprint 900, all Daytona 750/900/1000/1200, all Sprint Sport, all Sprint Executive, all 750/900 Speed Triple, Thunderbird Sport,
Fit Thunderbird and Adventurer up to VIN43509. Will also fit Thunderbird, Adventurer and Legend after VIN 92814.
Fit Trophy up to VIN 42274. Will also fit Trophy from VIN 96152 to VIN 98479.
Fit Trident up to VIN 44301.
Fit Tiger 900 (carburettor model) up to VIN 43523
Dust seal to fit most early carburettor models. 43 mm fok tube and 55 mm internal fork slider size. Sold as a pair.
Check before ordering as both Showa and Kayaba forks have been used on the same models. Fits 750/900 Trident, early 900/1200 Trophy, 900 Sprint, 900 Thunderbird, legend.
Fork dust seal with integral flexible fork tube protector to fit Kayaba forks. 43 mm fok tube and 55 mm internal fork slider size. Sold as a pair.
Check before ordering as both Showa and Kayaba forks have been used on the same models. Fits 750/900 Trident, early 900/1200 Trophy, 900 Sprint, 900 Thunderbird, Legend.
Ptfe coated top and bottom bush set to fit Kayaba 43mm forks used on Trident, Trophy, Sprint, Speed Triple, Daytona, Tiger, Thunderbird, TT600 and Daytona 600/650. Triumph have used Kayaba and Showa as fork suppliers, sometimes with both types used on the same series of bike model. If possible please check before ordering or supply the vin number. The Kayaba forks use 20mm wide (actually 19.85mm) bottom bushes and as supplied from new have a smooth looking dust seal, with no spring showing. This kit consists of 4 bushes.