Triumph Front Suspension And Steering

Triumph (all parts stocked)

Wheel Spindle Bolt / Nut Stainless Steel
( S027 )

Steel steel replica of the original M20 x 1 mm pitch Triumph front wheel spindle nut. These are beautifully made and as original they are tightened with a 12mm hex. (allen) key.

Fits 750/900 Trident, 750/900/1000/1200 Daytona, 900/1200 Trophy, Thunderbird 900, Thunderbird Sport, Legend, Adventurer, Daytona T595, Daytona 955 up to vin 132512, T509, 955 Speed Triple up to vin 141871.



£15.00
More info  

Top Fork Yoke Nut Polished Stainless Steel
( S029 )

Stainless steel polished top fork yoke nut. Replaces Triumph part number 2040060-T0301.

Fits: Adventurer, America, Bonneville 800/865, T100, SE, Daytona 750/900/1000/1200, Legend TT, Rocket III, Classic, Roadster, Touring, Speed Four, Speed Triple 750/900, Speedmaster, Sprint 900, Sprint Executive, Sprint Sport, Sprint ST 955, Sprnt RS 955, Thruxton 900, Thunderbird 900, Thunderbird Sport, Tiger 900 carb and EFI, Tiger 955, Trident 750/900, Trophy 900/1200 and TT600.  



£19.95
More info  

Replacement chromed fork tubes Daytona 900/1200 Speed Triple 900
( S062 )

Ready to fit original equipment quality front fork tubes to fit only Daytona 750/900/1000/1200, Speed Triple 750/900, and Sprint Sport. Check fork overall length from top nut to spindle centre is 81 cm. Price per tube



£89.00
More info  

Replacement chromed fork tubes to fit most models
( S063 )

Replacement front fork tubes available for the models listed.  Internal tube components need swapping from original to replacement tubes which involves grinding the end of the original tube.. Triumph have used Kayaba and Showa as suppliers for forks. We stock seals and fork bushes. State model and vin number when ordering please. Popular models in stock, others to order. Price per tube. Made in UK.





£99.00
More info  

Replacement chromed fork tubes to fit most models
( S064 )

Ready to fit original equipment quality front fork tubes, there is no grinding the end of the tube and having to swap internal valves. Triumph have used Kayaba and Showa as suppliers for forks. We stock seals and bushes for both Kayaba and Showa. State model and vin number when ordering. Popular models in stock, others to order. Price per tube.





£135.95
More info  

Trident/Trophy/Sprint 900 Multirate Kayaba uprated fork springs.
( S065 )

Silicon chrome progressively wound 20% uprated front fork springs to fit Trident, 900 Sprint and Trophy models. These transform the handling of early models which suffer with excessive fork dive. Made for 43mm Kayaba forks, these have been successfully fitted to other models not listed here with 43mm forks, if you are prepared to adjust the preload spacer length.  Approximate overall length 475mm. Please state model of bike and vin number when ordering. Priced per pair

These fit all Sprint 900 (not Sprint Sport with adjustable forks), all Sprint Executive, Trident 750 and 900 up to VIN 44301, all Trophy up to VIN 42274. Will also fit all Trophy from VIN 96152 to VIN 98479.

 

 



£65.00
More info  

Trident/Trophy/Sprint 900 Multirate Showa uprated fork springs.
( S066 )

Silicon chrome progressively wound 10% uprated front fork springs to fit Trident, 900 Sprint and Trophy models. These transform the handling of early models which suffer with excessive fork dive. Made for 43mm Showa forks, these have been successfully fitted to other models with 43mm forks, if you are prepared to adjust the preload spacer length.  Approximate overall length 495mm. Please state model of bike and vin number when ordering. Priced per pair.



£59.00
More info  

Fork Springs Daytona 900/1200 and Speed Triple 900
( S069 )

Silicon chrome progressively wound 10% uprated front fork springs. Length: 425 mm.  Priced per pair

Fits Sprint Sport, Daytona Super 3, Daytona 900/1200 up to vin 36445 and Speed Triple 900 up to vin 29155.



£59.00
More info  

Steering head bearing set.
( S304 )

Koyo taper roller bearings top and bottom with built in seals.

Fits all models up to vin 43916. These are all early steel frames.

Tiger 900,Thunderbird 900, 750/900 Trident, 750/900/1000/1200 Daytona, Sprint 900, 750/900 Speed Triple and 900/1200 Trophy.

Also fits Rocket 3 Classic, Touring and Roadster.



£29.00
More info  

Steering head bearing set.
( S305 )

Koyo taper roller lower and circlip ballrace upper bearing with built in seals.To fit all 750/900/1200 steel frame models after vin number 43916 and 900/955 injected Tiger models. After vin number 43916 fits, Thunderbird 900, Thunderbird Sport, Legend, Adventurer, 750/900 Trident, Sprint 900, Sprint Sport, Sprint Executive, 900/1200 Trophy, 900/1200 Daytona, 900 Tiger...

£25.00
More info  

Steering head bearing set.
( S306 )

Taper roller lower and ballrace upper bearing. To fit all 900/955 aluminium alloy framed models. Speed Triple, Daytona and Sprint RS/ST.



£27.00
More info  

Steering head bearing set.
( S307 )

Taper roller lower and ballrace top bearing. To fit all 600 models, TT600, Speed Four and Daytona 600.



£26.00
More info  

Steering Head Bearing Set 675, 800, 1050
( S315 )

Taper roller steering head bearing set and seals to fit 1050 Sprint ST, 1050 Tiger, 800 Tiger, Tiger XC, Daytona 675 and Street Triple. All Balls brand.



£29.00
More info  

Steering Head Bearing Taper Roller (Koyo Japan)
( S320 )

Replacement taper roller steering head bearing set to fit Bonneville range. 

Fits: America, Bonneville 800/865, T100, SE, Scrambler, Speedmaster, Thruxton

 



£29.95
More info  

Replacement fork seals (priced per pair)
( S495 )

Top quality fork oil seals for 41 mm forks with double lipped spring sealing to fit Bonneville 800/865, T100, Scrambler, Thruxton and America. Also fits the upside down forks used on the 675 Daytona and 675 Street Triple. This style of seal is used on most original equipment high end front suspension legs now. The extra spring on the outer side of the seal mimimises the risk of road debris entering and damaging the inner oil seal section.



£10.95
More info  

Fork Seal TT600, Speed Four, Daytona 600/650
( S499 )

High quality fork oil seals to fit the 600 and 650 range. These are double spring sealing seals with a sprung lip on the top edge as well as the inside of the seal. Outer size 55 mm. Fork tube size 43 mm.This style of seal is used on most original equipment high end front suspension legs now. The extra spring on the outer side of the seal mimimises the risk of road debris entering and damaging the inner oil seal section.

Fits TT600, Speed Four, Daytona 600 and Daytona 650.

Also fits Rocket 3, Classic, Roadster and Touring.



£10.95
More info  

Replacement fork seals (priced per pair)
( S501 )

43 mm fork seals to fit Kayaba forks. These are very high quality seals, now with sprung lips on both the top and bottom of the each seal (see picture 2). .This style of seal is used on most original equipment high end front suspension legs now. The extra spring on the outer side of the seal mimimises the risk of road debris entering and damaging the inner oil seal section. Triumph for their 43 mm forks have used both Kayaba (55 mm outer diameter seal) and Showa (54 mm outer diameter seal) as their fork suppliers. If in doubt just state the model of bike and VIN number when ordering. These fit Trident 750/900, Trophy 900/1200, all Sprint 900, all Daytona 750/900/1000/1200, all Sprint Sport, all Sprint Executive, all 750/900 Speed Triple, Thunderbird Sport,

Fit Thunderbird and Adventurer up to VIN43509. Will also fit Thunderbird, Adventurer and Legend after VIN 92814.

Fit Trophy up to VIN 42274. Will also fit Trophy from VIN 96152 to VIN 98479.

Fit Trident up to VIN 44301.

Fit Tiger 900 (carburettor model) up to VIN 43523



£10.95
More info  

Replacement fork seals (priced per pair)
( S502 )

43 mm fork seals to fit Showa forks. Triumph for their 43 mm forks have used both Kayaba (55 mm outer diameter seal) and Showa (54 mm outer diameter seal) as their fork suppliers. Just state what bike you have when ordering. NOW WITH LATEST DOUBLE SPRUNG LIP DESIGN. These fit all Sprint ST 955, all Sprint RS and all Sprint ST 1050. They also fit (please check VIN numbers) Trophy900/1200, Trident, Tiger 1050, Tiger Sport, Speed Triple 1050 up to VIN 461331 

Thunderbird, Adventurer and Legend after VIN 43510 and up to VIN 92814.  

Trophy after VIN 42275 except from VIN 96152 to VIN 98479.

1050 Speed Triple up to VIN 461331

Trident after VIN 44302.

Tiger 900 after VIN 43524

Sprint RS and ST 955

Sprint 1050, Sprint GT, Tiger 1050 and Tiger 800.

Tiger 900 (injection) and 955 Tiger



£10.95
More info  

Replacement fork seals (priced per pair)
( S503 )

45 mm fork seals to fit Showa forks. These were first used on the T595 Daytona and T509 Speed Triple. Also fit 955 Daytona and 955 Speed Triple. Now with double spring sealing.



£10.95
More info  

Fork dust seals Kayaba 43 mm forks
( S508 )

Dust seal to fit most early carburettor models. 43 mm fok tube and 55 mm internal fork slider size. Sold as a pair.

Check before ordering as both Showa and Kayaba forks have been used on the same models. Fits 750/900 Trident, early 900/1200 Trophy, 900 Sprint, 900 Thunderbird, legend.



£12.95
More info  

Dust seals (Kayaba) with integral fork tube shield
( S509 )

Fork dust seal with integral flexible fork tube protector to fit Kayaba forks. 43 mm fok tube and 55 mm internal fork slider size. Sold as a pair.

Check before ordering as both Showa and Kayaba forks have been used on the same models. Fits 750/900 Trident, early 900/1200 Trophy, 900 Sprint, 900 Thunderbird, Legend.



£12.95
More info  

Fork dust seals Showa 43 mm forks
( S514 )

43mm fork tube size dust seals to fit Showa forks (with 54 mm fitting in fork). These all have a garter style spring visible. Sold as a pair. Fits Showa forks on:

Adventurer, Legend, Sprint RS, Sprint ST 955, Sprint ST 1050, Sprint GT, Trident 750/900, Trophy 900/1200, Thunderbird 900



£12.95
More info  

Dust seals (Showa) with integral fork tube shield
( S515 )

43mm fork tube size dust seals to fit Showa forks (with 54 mm fitting in fork) with built in fork tube protector. Sold as a pair.



£12.95
More info  

Fork Dust Seals, 45mm Showa forks.
( S516 )

Dust seal to fit 45mm Daytona T595, Daytona 955, Speed Triple T509 and 955. Sold in pairs.



£12.95
More info  

Fork Bush Set Bonneville 41 mm
( S614 )

Set of x 4 fork bushes to fit Bonneville forks. Forks on Bonneville are 41 mm with 12 mm wide top bush and 15 mm wide bottom bush.



£36.00
More info  

Fork bush set, 43mm Kayaba
( S615 )

Ptfe coated top and bottom bush set to fit Kayaba 43mm forks used on Trident, Trophy, Sprint, Speed Triple, Daytona, Tiger, Thunderbird, TT600 and Daytona 600/650.  Triumph have used Kayaba and Showa as fork suppliers, sometimes with both types used on the same series of bike model. If possible please check before ordering or supply the vin number. The Kayaba forks use 20mm wide (actually 19.85mm) bottom bushes and as supplied from new have a smooth looking dust seal, with no spring showing. This kit consists of 4 bushes.

 

 



£28.00
More info  

Fork bush set Showa
( S616 )

Fork bush set for 43 mm Showa forks. Check before before ordering you have Showa forks. Showa forks use 15mm wide (actually 14.85mm) bottom bushes and are fitted with a dust seal with a spring showing around the sealing lip. Another important identifying feature is the outside size of the oil and dust seals which is 54 mm. The kit consists of 4 bushes.

Adventurer, Legend, Sprint RS, Sprint ST 955, Sprint ST 1050, Sprint GT, Trident 750/900, Trophy 900/1200, Thunderbird 900



£36.00
More info  

Showa fork leg nylon piston ring
( S617 )

Showa fork leg nylon 3.82 mm wide piston ring.
Fits SHOWA 43 mm forks only used on:

Adventurer, Legend, Sprint RS, Sprint ST 955, Sprint ST 1050, Sprint GT, Trident 750/900, Trophy 900/1200, Thunderbird 900

 

 



£5.25
More info  

Fork bush set Upside down forks 1050
( S618 )

x 4 Teflon coated fork bush set to fit all Tiger 1050 and Speed Triple 1050 up to vin 423184



£25.00
More info  

Fork Bush Set, 45mm Showa.
( S619 )

Ptfe coated fork bush set to fit T595, T509, 955 Daytona and Speed Triple. Very similar to some Honda Fireblade forks, these use a 45mm tube and are supplied to Triumph by the Japanese Showa company. Apart from the way the front mudguard is retained (presumably to avoid fixing lugs and make the external machining easier), these are a good quality product.



£29.00
More info  

Dust Seal Tiger 900 Carburettor Models
( S635 )

Dust seals to fit Tiger 900 forks up to VIN 43523. Sold as a pair.



£12.95
More info  

Fork Dust Seals 41 mm
( S637 )

Fork dust seals to fit 41 mm Showa forks. Fits Bonneville 800/865, T100, Thruxton, Scrambler, America, Speedmaster. Also fits the upside down forks used on the  675 Daytona and 675 Street Triple. Sold as a pair.



£12.95
More info  

Retaining Snap Ring/Circlip for Kayaba forks
( S650 )

Replacement snap ring to fit Kayaba 43 mm forks made from 1.5 mm stainless steel. Original snap rings often become rusty in use.

Fits all Kayaba forks used on:Trident 750/900, Trophy 900/1200, all Sprint 900, all Daytona 750/900/1000/1200, all Sprint Sport, all Sprint Executive, all 750/900 Speed Triple, Thunderbird Sport.

Made in Japan

 



£2.95
More info