Triumph Rear Suspension

Triumph (all parts stocked)

Drag Link Bearing and Seal Kit T300
( SD520 )

Drag link seal and bearing kit.

Fits 750/900 Speed Triple, 750/900 Trident, 900/1200 Trophy, 750/900/1000/1200 Daytona, Sprint 900, Sprint Sport and Sprint Executive.



£19.00
More info  

Drop Link Bearing and Seals Kit T300
( SD522 )

Seal and bearing kit for x 1 drop link (x 2 kits required for each bike).

Fits 750/900 Speed Triple, 750/900 Trident, 900/1200 Trophy, 750/900/1000/1200 Daytona, Sprint 900, Sprint Sport and Sprint Executive



£29.00
More info  

Drag Link, Drop Link and Sleeve Kit T300
( SD524 )

Drag and drop link kit with hardened sleeves.

Fits 750/900 Speed Triple, 750/900 Trident, 900/1200 Trophy, 750/900/1000/1200 Daytona, Sprint 900, Sprint Sport and Sprint Executive.



£99.00
More info  

Drag and Drop Link Kit with Main Spindle
( SD526 )

Drag and drop link kit with 4 hardened steel sleeves, 6 needle roller bearings, x 6 face seals and x 4 oil seals. 

Fits 750/900 Speed Triple, 750/900 Trident, 900/1200 Trophy, 750/900/1000/1200 Daytona, Sprint 900, Sprint Sport and Sprint Executive.



£153.95
More info  

Drag Link Sleeve 2057955-T0301
( SD528 )

Drag link sleeve replaces Triumph 2057955-T0301. This is included in our kits SD524 and SD526. This sleeve is 20 mm diameter, approximately 76 mm long and accepts a 12 mm through bolt.

Fits 750/900 Speed Triple, 750/900 Trident, 900/1200 Trophy, 750/900/1000/1200 Daytona, Sprint 900, Sprint Sport and Sprint Executive.



£24.95
More info  

Swinging Arm Bearing Set
( SD530 )

Swinging arm needle roller bearing set. Quantity 4.

Fits: Adventurer, Daytona 750/900/1000/1200, Daytona Super III, Legend TT (up to VIN 101853), Speed Triple 750/900, Sprint 900, Sprint Executive, Sprint Sport, Thunderbird 900 (up to VIN 101853), Thunderbird Sport (up to VIN 101853), Trident 750/900, Tiger 900, Trophy 900/1200 (up to VIN 102932)



£18.95
More info  

Thunderbird & Tiger drag link bearing kit (rear shock pivot point)
( SD540 )

Hardened sleeve, needle roller bearing and 2  seals. This just replaces the bearing assembly rear suspension pivot point on Thunderbird 900, Thunderbird Sport, Legend and Adventurer. Also fits Tiger 900 (carburettor models).



£23.00
More info  

Thunderbird & Tiger drag link bearing kit
( SD541 )

Complete drag link bearing, hardened sleeve and seal kit. This fits Thunderbird 900, Thunderbird Sport, Legend,  Adventurer and Tiger 900 (carburettor models).



£75.00
More info  

Drag link Bearings, Seals and hardened sleeve kit T595, 955 Daytona, 955 Speed Triple
( SD550 )

Drag link bearings, seals and the hardened sleeve for all single sided swinging arm models T595, 955 Daytona, T509, 955 Speed Triple, and 1050 Speed Triple up to VIN 461331. The drop link is a plated steel component.



£40.00
More info  

Drop Link Bearings, Seals and Hardened Sleeve kit to fit T595, 955 Daytona, 955 Speed triple
( SD554 )

Drop link bearings, seals and all hardened sleeves for T595, 955 Daytona, T509, 955 Speed Triple, 1050 Speed Triple up to VIN 461331. The drop link is the aluminium alloy part of the linkage.



£119.00
More info  

Drag Link Bearing Kit, 1050 Sprint ST
( SD555 )

Bearings, seals and hardened sleeves to fit 1050 Sprint ST rear suspension drag link.

The drag link has no grease nipple fitted and unless the original crowded roller type needle bearings are routinely regreased, they fail due to lack of lubrication. We supply half complement type needle bearings which although they have a lower loading rating, retain more grease and last longer in service. 



£99.00
More info  

Drag Link Kit 600/650, 955 Sprint ST/RS,
( SD556 )

Drag  link bearings, seals and hardened sleeves to fit TT600, Speed Four, Daytona 600/650, 995 Sprint ST and 955 Sprint RS for both twin sided and single sided swinging arm models. There are no drop link bearings/seals used on the twin sided swinging arm models.



£79.00
More info  

Drag Link bearings, Seals and Sleeve Kit For 955 Daytona Twin Sided Swinging Arm
( SD558 )

Drag link bearings, seals and hardened sleeves to fit the twin sided swinging arm 955 Daytona. There are no drop link bearings/seals used on this model.

 

 



£105.00
More info  

DropLink Bearing Kit 955/1050 Sprint ST and RS Single Sided Swinging Arm.
( SD562 )

Drop link bearings, seals and threaded hardened sleeve to fit 955 Sprint ST/RS single sided swinging arm, 1050 ST and Sprint GT.



£62.00
More info  

Drag Link Bearing Kit, 1050 Sprint GT
( SD565 )

Drag link repair kit. bearings, seals and hardened sleeves for 1050 Sprint GT



£89.00
More info  

Tiger 800 Drag Link Bearings and Seal Kit
( SD569 )

Complete set of seals and needle roller bearings to fit drag linkage on Tiger 800 & XC



£49.00
More info  

Swinging Arm Pivot Bearing Set 955 & 1050
( SD580 )

Swinging arm bearing and seal kit to fit all single sided swinging arm Daytona, Speed Triple and Sprint ST/RS models.

Fits: Daytona T595, Daytona 955 (single sided swinging arm), Speed Triple T509, 955 Speed Triple, 1050 Speed Triple & R, 955 Sprint RS, 955 Sprint ST, 1050 Sprint ST and 1050 Tiger Sport.



£29.95
More info  

Swinging Arm Pivot Bearing Set 900 & 955 Tiger Wire Spoked Wheel Models
( SD582 )

Swinging arm pivot bearing set for Tiger 900 (injection) & all 955 Tiger with wire spoked wheels (up to VIN 198874). These swinging arms have eccentric chain adjusters at the rear.



£39.95
More info  

Swinging Arm Bearing And Seal kit To Fit Tiger 955 Cast Wheel Models.
( SD584 )

Swinging arm bearing and seal kit to fit Tiger 955 from VIN 198874. The cast alloy model 955 Tiger models. The hardened sleeve is not included in the kit at this time.



£29.95
More info  

Hagon rear suspension unit 17" 328 mm between centres
( SR072 )

Hagon rear suspension unit, intended for Trophy 1200 models from VIN 55072 is the longest unit we stock. This is also used on cafe racer projects, Speed Triple 900 and Daytona 900/1200 if you wish to quicken the steering. Replacement rear shock with adjustable damping and 2 year warranty. Made in UK. Unit is oil and gas type, oil being used to control the piston speed and gas as an extra cushion.



Contact Us For Details

Hagon rear suspension unit 955 Sprint ST
( SR073 )

Replacement rear shock with adjustable damping. 2 year warranty. Made in UK.

Unit is oil and gas type, oil being used to control the piston speed and gas as an extra cushion.



£299.00
More info  

Hagon Rear Suspension unit Tiger 900 EFI and 955 Tiger (spoked wheel model)
( SR100 )

Adjustable Hagon rear suspension unit with 2 year warranty fits all carburettor model Tiger 900i (injection)  and all wire spoked wheel 955 Tiger (up to VIN 198875)

Unit is oil and gas type, oil being used to control the piston speed and gas as an extra cushion.



£299.00
More info  

YSS Rear Suspension Unit
( SR115 )

YSS  Z-Series rear suspension unit with ride height adjuster, rebound damping adjuster and adjustable preload (release lock ring with allen key and rotate with a tommy bar - both included). Ride height adjusts overall length from 312 mm to 323 mm. (YSS claim up to 325 mm). Rigid 16 mm central shaft and 50 mm piston.

Fits 750/900 Trident, 750/1000/900/1200 Daytona, 750/900 Speed Triple, Sprint 900, Sprint Sport, Sprint Executive, 900/1200 Trophy.

The last 1200 Trophy twin headlight models made had a longer rear unit (use our product SR072), but the YSS unit can be fitted fully extended on ride height giving a slightly lower seat height. This will impact on the centre stand, making lifting more difficult if a lower ride height than standard is used. Made in Thailand.

 



£299.00
More info  

Rear Suspension Bearing 900 Tiger
( TB568 )

Bottom Rear shock absorber bearing and seals to fit 900 Tiger (carburettor model)



£16.50
More info  

Rear Suspension Bearing Kit 900 EFI and 955 Tiger (wire spoked wheel model)
( TB570 )

Rear shock absorber bottom needle roller bearing, hardened ground sleeve and seals to fit Tiger 900 EFI (injection) and 955 Tiger up to VIN 198874.



£35.95
More info  

Rear Suspension Bearing and seals 955 Tiger
( TB571 )

Bottom suspension unit bearing and x 2 seals only to fit all Tiger 900i, Tiger and Tiger 955 cast alloy wheel models. We do not have the sleeve on which the bearing runs for Tiger 955 from VIN 198875.

 



£16.50
More info  

Rear Suspension Bearing TT600/Seed 4/Daytona 600/650
( TB572 )

Rear shock absorber lower needle roller bearing and seals to fit all the 600/650 range. TT600, Speed Four and Daytona 600/650.  THIS ALSO FITS THE PIVOT ON THE UNDERSIDE OF THE SWINGING ARM - the drag link is attached here.



£17.00
More info