Show All

Show All

675



Contact Us For Details



Contact Us For Details



Contact Us For Details



Contact Us For Details



Contact Us For Details



Contact Us For Details



Contact Us For Details



Contact Us For Details

BRAKE PAD INFORMATION
( B001 )

BRAKE PADS - We stock organic (Armstrong), Semi-sintered (Nissin NS - see picture left) and fully sintered (DP and Nissin ST - see picture left) brake pads. Organic pads are resin bonded, kind to the discs, generally quieter and fine for general road use. Sintered pads are made from metal particles put under pressure and heat, offer the best stopping power, but also cause the most rotor wear and can make the most noise. Virtually all original equipment pads are now sintered. They are also the least affected by adverse conditions and are the pad to choose for high speed and track days. Sintered pads can feel 'grabby' and may lack 'feel' at the lever. Semi-metallic pads fall right in the middle for durability and performance. A trade off between sintered and organic, they still stop well, cause less rotor wear with better lever feel than sintered metallic pads and normally make less noise.

Nissin brake pad compound chart shown left.



Contact Us For Details

Rear Brake Master Cylinder Rebuild Kit
( B010 )

Rebuild kit for all Triumph (Nissin) rear brake master cylinders.

Fits America, Bonneville 800/865, T100, 600/650/675/750/900/955/1000/1200 Daytona, 750/900 Trident, 750/900/955/1050 Speed Triple, 900/1200 Trophy, Scrambler, Speed Four, Speemaster, Street Triple, Thunderbird 900, Legend, Adventurer, Thunderbird Sport, Sprint 900, Sprint Sport, Sprint Executive, Sprint ST 955/1050, Sprint GT, 955 Sprint RS, Street Triple, Tiger 800/900/955/1050, Tiger 800, Tiger XC, TT600



£26.95
More info  

4 piston front caliper seal kits for Nissin and Triumph calipers
( B056 )

Fits all Nissin and Triumph front 4 piston calipers on all (Apart from Brembo) Triumph sports and touring models. Kit contains 8 seals (4 outer dust seals and 4 hydraulic seals). To equilize brake pad wear, these calipers use 2 different piston sizes, 30mm (leading) and 34mm (trailing). Use silicone or rubber grease during assembly after cleaning out any corrosion from the dust seal groove. The joint seals on the 2 halves are now also included. The piston seals are genuine Nissin parts as used as original equipment by Triumph. These seals are also used in the 1/2 Nym spec. Triumph calipers. Made in Japan.

Fits: 600/650/675/750/900/955/1000/1050/1200/2300



£22.95
More info  

Earls brake hose to order
( B076 )

Earls stainless steel braided hose with neatly crimped stainless steel ends can be supplied to order for every model. We charge per hose with the choice of clear, black or no covering on the braiding. Popular models are stocked, others to order in approximately 3 or 4 days. Hoses are supplied with new copper banjo sealing washers. Recently produced models from Triumph are equiped with braided hoses (although the ends are plated not stainless steel) for reduced lever travel over earlier models with their reinforced rubber hoses. Custom lengths no problem. 

Earls stainless steel braided hose with stainless steel banjo crimped ends with new copper sealing washers. 600/650/750/800/865/900/955/1000/1050/1200/2300. Priced per hose. Please state model when ordering.





£29.95
More info  

Front brake reservoir container.
( B193 )

Genuine Nissin front brake reservoir plastic pot used many Triumph models. This inclues the link pipe which fits some but no all models.

Fits  TT600, Speed Four, 600/650/675/955 Daytona, T595, T509, Thruxton, SE, Bonneville (from vin 380777) , 955/1050 Speed Triple, Sprint 955 ST/RS, 1050 Sprint ST, Tiger 1050, Sprint 1050 GT.



£19.99
More info  

Angled inlet to master cylinder with seat/circlip kit
( B194 )

Angled inlet to front brake reservoir used on most sports models. The 'O' ring seal and circlip are the same components used in the inlet to Nissin rear brake master cylinders. Genuine Nissin component. Made in Japan.

Fits TT600, Speed Four, 600/650//955 Daytona, T595, T509, Thruxton, SE, Bonneville (from vin 380777) , 955 Speed Triple, 1050 Speed Triple (up to VIN 461331), Sprint 955 ST/RS, 1050 Sprint ST, Tiger 1050, Sprint 1050 GT



£17.95
More info  

Rear brake master cylinder boot Nissin.
( B226 )

Replacement master cylinder boot to fit all Nissin rear brake master cylinders. 



£4.95
More info  

Brake bleed screw covers
( B286 )

x 3 rubber bleed screw covers.



£1.95
More info  

Brake paste
( B292 )

Brake paste, ideal for brake pad pin threads.



£1.95
More info  

Brake Banjo Bolt Stainless Steel (Single)
( B429 )

Single banjo width Earl's stainless steel brake banjo bolt for most application where x 1 hose is fitted.

M10 x 1.25 pitch thread.



£4.95
More info  

Brake Banjo Bolt Stainless Steel (Double)
( B430 )

Double width banjo stainless steel bolt for x 2 hose connection. Examples are front brake splitter on 3 and 4 cylinder carburettor models.

M10 x 1.25 pitch thread.



£5.49
More info  

Brake Banjo Annealed Copper Washers 10 mm
( B432 )

Original style copper washer 10 mm bore, 15.70 outer diameter and 1.20 mm thick. Pack size 10 pieces. Made in USA.



£3.95
More info  

27mm caliper piston and seals (Stainless Steel)
( B436 )

Stainless steel caliper piston 27 mm diameter and 31 mm long with seals for x 1 caliper (x 2 pistons and x 4 seals). These are not genuine Nissin parts.

Fits front and rear calipers on Thunderbird 900, Legend, Thunderbird Sport, Adventurer, 750/900 Trident, 900/955 Tiger, Bonneville, T100, Thruxton, America, Speedmaster, SE, Scrambler, Trophy 900 and Sprint 900 up to vin 9083, Trophy 1200 up to vin 4902

Fits rear caliper only on 750/900/1000/1200 Daytona, 955 Daytona (single sided swinging arm model), 750/900/955/1050 Speed Triple, 900 Sprint Sprint Sport, Sprint Executive, 955/1050 Sprint ST, Sprint RS (single sided swinging arm), Sprint GT, Tiger 1050, Tiger 1050 SE, Trophy 900 and Sprint 900 from vin 9084, Trophy 1200 from vin 4903

Fits front caliper Tiger 800, Tiger XC, Street Triple 675,



£44.95
More info  

Piston Set 1/2 Nymfron
( B446 )

Set of x 4 Nissin caliper pistons (x 2  30 mm pistons and x 2  34 mm Nymfron low friction pistons). Can be fitted to any Nissin/Triumph 4 piston caliper (not Brembo). Nissin only coat the 34 mm to reduce friction/drag. This was done to help eliminate the long lever travel problems.



£54.00
More info  

Rear Caliper Piston and Seal kit 38 mm (pattern)
( B448 )

Pattern caliper piston and seals to fit rear calipers on all sports twin sided swinging arm models.

Fits TT600, Speed Four, Daytona 600, Daytona 650, Daytona 675, Street Triple, Daytona 955 (twin sided swinging arm model), Tiger 800, Tiger XC,



£24.00
More info  

Brake pad pin rear Nissin Tiger 800, TT600, Daytona 955
( B609 )

Rear brake caliper pad pin and screw cover fits Nissin rear calipers on:

Daytona 600/650, 675 Daytona to VIN 564947, Daytona 995 (twin sided swinging arm model only), Speed Four, Street Triple and Street Triple R up to VIN 560476, Tiger 800, XC, XCA, XCx, XR, XRT, XRx, TT600



£7.99
More info  

Disc Bolt 10 mm shoulder 30 mm long
( B810 )

Stainless steel disc bolt M8 x 1.25 mm pitch. Thread length 30 mm including 10 mm shoulder.

Fits front and rear on:

Bobber, Bonneville T120, Daytona 750/900/1000/1200, Daytona 600/650, Daytona 675, Daytona 955 (twin sided swinging arm), Rocket III, Speed Four, 750/900 Speed Triple, Sprint 900, Sprint Executive, Sprint Sport, Sprint RS (twin sided swinging arm), Street Cup, Street Scrambler, Street Triple 675, Street Triple R, S RS, Thruxton R (liquid cooled), Tiger 800, Tiger 1050, 750/900 Trident, 900/1200 Trophy, TT600

Fits front only on:

Daytona T595, Daytona 955 (single sided swinging arm), Speed Triple 955/1050, Sprint RS (Single sided swinging arm), Sprint ST 955/1050,



£5.49
More info  

Brake pad Armstrong Bonneville, Thunderbird 900, Tiger 800/955
( B902 )

Armstrong semi metallic brake pads.

Fits the front of the following: Bonneville, T100, Scrambler, Speedmaster, America, Thunderbird 900, Legend, Adventurer, Thunderbird Sport, Tiger 800, Tiger XC, Tiger 900 (injection), Tiger 955, 675 Street Triple (not R model)

Fits the rear of the following: Thunderbird 900, Legend, Adventurer, Thunderbird Sport, Tiger 900 (injection), Tiger 955 (up to vin 198874)

Supplied as 2 pads for x 1 caliper



£12.95
More info  

Brake pad Armstrong Bonneville (rear), 955, 1050, 900 left front
( B911 )

Armstrong brake pads. Supplied as 2 pads for x 1 caliper.

Fits the rear of the following: Tiger Explorer, Bonneville, T100, Scrambler, America, Speedmaster. All single sided models T595 Daytona, 955 Daytona, T509, 955 Speed Triple, 1050 Speed Triple, 955 Sprint ST, 1050 Sprint ST, Sprint 955 RS (single sided swinging arm models), Trophy 1215 & SE, Tiger Sport

Fits the front left side of the following: 750/900 Trident, 900 Trident Sprint and Trophy 900 up to vin 9082, Trophy 1200 up to vin 4901



£12.95
More info  

Brake pad rear Nissin 675 Daytona, Street Triple, Tiger 800, TT600
( B914 )

Nissin NS semi metallic rear brake pad.

Fits the rear of the following: TT600, Speed 4, Daytona 600, Daytona 650, Daytona 675, Street Triple, Street Triple R, Daytona 675 R, Daytona 955 (twin sided swinging arm), Tiger 800, Tiger XC,



£32.95
More info  

Rear Brake Pads 675, TT600, Tiger 800, Street Triple
( B915 )

Nissin NS semi metallic rear brake pad.

Fits the rear of the following: TT600, Speed 4, Daytona 600, Daytona 650, Daytona 675, Street Triple, Street Triple R, Daytona 675 R, Daytona 955 (twin sided swinging arm), Tiger 800, Tiger XC,



£12.95
More info  

Front Wheel Bearings and Seals 675
( BE068 )

Koyo front wheel bearings x 2 and dust seals x 2.

Fits: Bonneville Bobber, T120, 675 Daytona, 675 Daytona R, Street Scrambler, Street Triple, Street Triple R, Thruxton (liquid cooled), Thruxton R (liquid cooled)



£22.95
More info  

Front Wheel Bearings 600/675/955
( BE070 )

x 2 Koyo front wheel bearings to fit

TT600, Speed Four, Daytona 600/650, Daytona 675, Street Triple, 955 Speed Triple from VIN 141872, 955 Daytona from VIN 132513,



£17.00
More info  

Wheel Bearing (Koyo) and dust seals Tiger 800, Tiger 955, TT600
( BE078 )

Japanese Koyo wheel bearings (sold as a pair with dust seals for x 1 wheel). Dust seals may not fit all models.

Fits FRONT WHEEL: all Rocket 3, Thunderbird 1600/1700, Tiger 800 range, Trophy 1215

Fits REAR WHEEL: Bobber, Bonneville T120, Daytona 600/650, Daytona, 675, Daytona 955 (dual sided swinging arm), Tiger 800, Tiger XC, Tiger 1050, Tiger 955 (cast wheel model), all Rocket 3, Speed Four, Speedmaster, Street Scrambler, Street Triple 675, Street Triple 765, TT600, Daytona 600/650, Sprint RS (twin sided swinging arm), Tiger 1050 , Thunderbird 1600/1700, Thruxton, Thruxton R



£23.95
More info  

Sprocket Carrier Koyo Bearing and Seal Tiger 800, 955
( BE082 )

Japanese Koyo sprocket carrier (cush drive) bearing and seal to fit:

Tiger 800, Tiger 800 XC

Tiger 955 (cast wheel)

Bonneville, T100, America, Speedmaster, Thruxton, Scrambler

TT600, Speed Four, Daytona 600/650

955 Sprint RS (twin sided swinging arm)

955 Daytona (twin sided swinging arm)

675 Daytona, Street Triple

 



£9.95
More info  

Valve Shims 7.5 mm 1.80 - 2.95
( BE704 )

7.5 mm valve shim.

Fits: Daytona 600/650, Daytona 675, Daytona 675 R, Speed Four, TT600, Street Triple, Street Triple R, Tiger 800, Tiger 800 XC, Tiger XR.

 





£3.95
More info  

Lever Clamp/Mirror Support
( C195 )

Replacement clamp/mirror support or new clamp for models with no mirror fixing. Used as original on clutch and front brake lever on 955/1050 Speed Triple, Speed Four, Thruxton, SE, Bonneville (from vin 380777), 955/1050 Tiger. Ideal to hold mirrors when converting Daytona 955/T595 to Speed Triple. 10mm threaded lever clamp used on many unfaired models for mirror fixing.  Made in Japan. 

Fits: Bonneville (from VIN 380777), SE, Scrambler, Speed Four, Speed Triple 955, T509, 1050 Speed Triple, Street Cup, Street Scrambler, Street Triple, Street Triple R, Street Twin, Thruxton 900, Tiger 1050



£9.95
More info  

Lever Clamp/Mirror Support
( C195 )

Replacement clamp/mirror support or new clamp for models with no mirror fixing. Used as original on clutch and front brake lever on 955/1050 Speed Triple, Speed Four, Thruxton, SE, Bonneville (from vin 380777), 955/1050 Tiger. Ideal to hold mirrors when converting Daytona 955/T595 to Speed Triple. 10mm threaded lever clamp used on many unfaired models for mirror fixing.  Made in Japan. 

Fits: Bonneville (from VIN 380777), SE, Scrambler, Speed Four, Speed Triple 955, T509, 1050 Speed Triple, Street Cup, Street Scrambler, Street Triple, Street Triple R, Street Twin, Thruxton 900, Tiger 1050



£9.95
More info  

Clutch lever 600/650/675/955 Daytona, Street Triple and 955 Speed Triple.
( C347 )

Replacement lever for Daytona 600/650, 675 Daytona and Street Triple 675. Also fits Speed Four after vin 201642, 955 Daytona models from vin 186150. Late model single sided swinging arm 955 Sprint RS from vin 186151.



£11.50
More info  

Front brake Tiger Explorer, Tiger 800
( C356 )

Front brake lever as fitted to Street Twin, Bonneville T120, Bonneville T120 Black, Thruxton (Liquid cooled), Trophy 1215, Trophy 1215 SE, Tiger 800, Tiger XC, XCA, XRT, Tiger 1050, Tiger Sport and Tiger Explorer. Can be fitted to most of the Triumph non radial front brakes if desired. Alloy finish.



£14.95
More info  

Front Brake Lever Daytona 675/ 1050 Speed Triple
( C449 )

Replacement front brake lever to fit Nissin radial brake caliper model Daytona 675 and 1050 Speed Triple.



£14.99
More info  

Clutch cable Daytona 675
( CC765 )

Replacement clutch cable to fit Daytona 675 up to VIN 564947. Inner length 119cm. Outer length 107 cm  



£14.95
More info  

DID X-ring 525 chain and sprocket kit. Bonneville range/600/650/675
( CS151 )

DID VM2 X-ring gold chain and sprocket kit. Available for all Bonneville models, TT600, Speed Four, Daytona 675 and 675 Street Triple. Please state model when ordering. (525 chain size). Front/rear/chain length details given are for standard factory sizes. Other size choice no problem.  



£119.00
More info  

DID X-ring gold chain 525
( CS154 )

Original equipment DID VX/VM2 X-ring gold 525 chain. Fits, TT600, Speed Four, Daytoina 600/650, 675 Daytona, 675 Street Triple, 800 Tiger and Tiger XC.





£85.00
More info  

Tab Washer 675, 600 and 650 models
( CS173 )

Gearbox sprocket tab washer to fit: TT600, Speed Four, Daytona 600, Daytona 650, Daytona 675, Daytona 675R, Street Triple, Street Triple R, Tiger 800 and Tiger 800XC. Replaces Triumph T1180328



£3.95
More info  

675 and 800 Gearbox Sprocket (525)
( CS945 )

Gearbox sprocket to fit Daytona 675, Street Triple, Tiger 800 and Tiger XC. Sizes available  14, 15 , 16 and 17 teeth.   (525 chain size)





£15.00
More info  

Rear Sprocket 675 and 800 (525)
( CS946 )

Rear sprocket to fit Tiger 800, Tiger XC, Daytona 675 and Street Triple available  in 47, 49 and  50 teeth. (525 chain size)





£25.00
More info  

Chain Rivet Tool
( CS950 )

Replica DID chain rivet tool. This will push the rivet link together and neatly rivet the ends over. To separate an old chain or shorten a chain, grind the rivet ends one side of the link to be removed until the side plate is hit. Go slightly below the surface to be sure the rivetting is well ground away, then knock apart with a punch and hammer.



£39.95
More info  

Front Discs Daytona 675, Street Triple, TT600 and Daytona 600/650
( D010 )

x 2 replacement front discs to fit TT600, Speed Four, Daytona 600, Daytona 650, Daytona 675 and Street Triple. Made in UK.

 



£249.00
More info  

Rear Disc 220 mm T595, T509, 955 Daytona, 955 Speed Triple
( D016 )

220 mm rear disc to fit TT600, Speed Four, Daytona 600, Daytona 650, T595, T509, 955 Daytona, 955 Speed Triple, 1050 speed Triple, 675 Daytona and Street Triple.



£69.00
More info  

Generator Stator 675 Daytona and Street Triple
( EG930 )

Generator/alternator with crank position sensor/trigger coil. The Electrex generator is a really excellent product and this is the latest deveopment. Previously we had advised customers to connect/reuse the original crank psition sensor as the original product always performs better. These new units from Electrex hopefully are a better and the crank sensor supplied works as well as original equipment. Fits all Daytona 675 up to VIN 564947 and Street Triple up to VIN 560476



£144.00
More info  

Headlamp rim to fit Speed Four,955/1050 Speed Triple, Rocket 3. .
( EL026 )

Chrome headlamp rim to fit all urban round twin headlight models. Speed Four, 675 Street Triple, T509/955/1050 Speed Triple and Rocket 3. Replaces Triumph T2700560 

Can also be used to replace the black headlight rim used on:Thunderbird Storm and Bonneville Bobber.

EL027 is a black version of this chrome rim.



£19.95
More info  

LED Rear Light 675
( EL341 )

Clear lens LED rear light and built in indicators to fit 675 Daytona and Street Triple models

675 Daytona, 675 Street Triple



£69.00
More info  

Headlight, twin replacement Speed Triple (Pair)
( EL391 )

Direct replacement flat glass symetrical dip/low beam light units with headlight bulbs and side light hole. Supplied as pairs, as the units although similar are not exactly the same as the originals.

Fits T509, Speed Triple 955, Speed Triple 1050, Speed Four, Street Triple



£69.00
More info  

Indicator left 1050 Speed Triple, 800 Tiger
( EL405 )

Left front or right rear indicator complete with wiring which connects into original Triumph connector on loom and correct stems as original.

Fits Street Triple 675, 800 Tiger, 800 Tiger XC, XRx, XCx, Daytona 675 from VIN 381275,1050 Tiger from VIN 48357 and Tiger Sport.



£19.95
More info  

Indicator right 1050 Speed Triple, 800 Tiger
( EL406 )

Right front or left rear indicator complete with wiring which connects into original Triumph connector on loom and correct stems as original.

Fits Street Triple 675, 800 Tiger, 800 Tiger XC, XRx, XCx, Daytona 675 from VIN 381275,1050 Tiger from VIN 48357 and Tiger Sport.



£19.95
More info  

Indicator Lens 675, 800, 1050
( EL407 )

Fits Street Triple 675, 800 Tiger, 800 Tiger XC, XRx, XCx, Daytona 675 from VIN 381275,1050 Tiger from VIN 48357 and Tiger Sport.



£4.95
More info  

Indicator
( EL410 )

Right front and left rear indicator.

Fits: Daytona 600, Daytona 650, 675 Daytona up to VIN 381274 and 1050 Tiger up to VIN 483576.



£19.95
More info  

Indicator
( EL411 )

Left front, right rear indicator.

Fits: Daytona 600, Daytona 650, 675 Daytona up to VIN 381274 and 1050 Tiger up to VIN 483576.



£19.95
More info  

Exhaust studs steel, all 3 cylinder models
( EX083 )

Set of 6 steel exhaust studs.  (M8 x 1.25 pitch thread both ends)  Approximately 38mm overall length. All  3 cylinder models.



£9.95
More info  

Exhaust header stainless steel studs (priced each)
( EX085 )

Stainless stud with copper plated flanged nut.

750/900 Trident, 900/1200 Trophy, 750/900/955/1050 Speed Triple, 750/900/955/1000/1200 Daytona, 900/955/1050 Tiger, 900 Thunderbird, Legend, Thunderbird Sport, Adventurer, 955/1050 Sprint ST, 955 Sprint RS



£3.95
More info  

Gear change lever rubber
( F089 )

These are very high quality gear change rubbers, which will outlast the original part. 41 mm long.

To Fit:

Sprint 900, Sprint Sport, Sprint Executive and Trident Sprint.

Speed Triple 750/900

Trophy 900/1200

Trident 750/900

Daytona 750, 900, 1000, 1200

Tiger 900 carburettor and injection (EFI)

Tiger 955

TT600 and Speed Four

Sprint 955 RS and 955 ST (up to VIN 139276)

Daytona T595 and 955 from VIN 87317 (one piece 'reverse' gear lever)

Speed Triple 955 from VIN 87317 (one piece 'reverse' gear lever)



£1.75
More info  

Gear Change Rubber 675, 1050, Thruxton
( F168 )

Gear change rubber to fit Thruxton, 675 Daytona, Street Triple, Tiger Sport, Tiger 1050, 1050 Sprint ST, Speed Triple 1050, Tiger Explorer, Tiger Explorer XC and Sprint 955 ST and RS from VIN 139277.



£1.95
More info  

Front mudguard extender 675 Daytona and Street Triple
( G409 )

675 Daytona up to VIN564974 and 675 Street Triple up to VIN560477



£19.99
More info  

Haynes 675 Daytona and Street Triple Manual
( H218 )

Haynes service and repair manual for the 675 range  (2006 to 2010). Daytona 675, Street Triple and Street Triple R.



£19.99
More info  

Fuel Filler cap 600, 650, 675, 800, 955, 1050
( J017 )

Replacement filler cap and 2 keys.

Fits 600/650/675/955 Daytona, 955/1050 Speed Triple, Speed Four, Sprint ST 955, Sprint RS 955, Sprint ST 1050, 955/1050 Tiger, 675 Street Triple, Tiger 800, Tiger XC, T595, T509



£49.95
More info  

Oil Filter OE Fits all Injected Models
( J185 )

Genuine Triumph oil filter fits all Bonneville (carburettor and EFI) and all Triumph models produced with fuel injection.

Fits: America, Bonneville 800/865, SE, T100, Bobber, T120, Daytona 600/650/675/955, T595, Rocket III, Classis, Roadster, Touring, Scrambler, Speed Four, Speedmaster, Speed Triple 955/1050, T509, Sprint ST 955/1050, Sprint RS, Street Cup, Street Scrambler, Street Triple 675/765, Street Twin, Thruxton 900/1200 R, Thunderbird 1600/1700, Sport, Storm, Tiger 800/900 EFI, 955, 1050, Sport, 1215 Explorer, Trophy 1215, TT600



£9.95
More info  

Oil filter wrench 955/1050/Bonneville range
( J187 )

Professional quality 3/8" drive or 19mm spanner size wrench for fitting and removal of genuine Triumph cannister oil filters on all Bonneville, Rocket 3, 600, 650, 675, 800, 955 and 1050  models.

 



£12.95
More info  

Sump plug washer 14 mm
( J189 )

x 4 sump plug washers to fit all models (expect a few models made in 1991-92 up to VIN 3926). Also fits Tiger Explorer final drive unit, 955 and 3/4 cylinder carburettor model oil cooler to hose joints.



£1.45
More info  

Sump Plug Bolt Magnetic
( J191 )

Sump plug bolt with magnetic insert to fit all models produced since 1994 (after approx. VIN  5000). M14 thread.  19 mm spanner size.



Contact Us For Details

Air Filter Hiflofiltro 675 Daytona & Street Triple
( J962 )

Replacement Hiflofiltro air fliter to fit all Daytona 675 and Street Triple up to VIN 564947



£18.95
More info  

Air filter Pipercross for Daytona 675 and Street Triple.
( J963 )

Pipercross performance air filter to fit Daytona 675 and Street Triple.



£47.95
More info  

Air filter Pipercross Race only for 675 Daytona and Street Triple.
( J964 )

Race only version Pipercross air filter to fit 675 Daytona and Street Triple.  Super low filter resistance element and more beautiful 3 cylinder air box roar.



£49.95
More info  

675 Daytona and Street Triple Lower Engine Cover Gasket Set
( K903 )

675 Street Triple and 675 Daytona lower engine cover gasket set.

Fits: Daytona 675 for years 2006-12 (up to VIN 564947) and all 675 Street Triples.



£9.95
More info  

Cam Cover Seal 675 and 800 all models
( K922 )

Cam cover seal and cam cover screw seal set to fit all Daytona 675, Street Triple 675 and Tiger 800 models.  Also fits: Street Triple S, Street Triple R and Street Triple RS 765 models. Fits all Street Triples from VIN 803572.



£24.95
More info  

Daytona 675R Lower Engine Cover Gaskets
( K930 )

675R Daytona from VIN 564948 lower engine cover gaskets.



£10.95
More info  

675 Street Triple sports rack up to 2009
( L260 )

675 Street Triple



£89.95
More info  

Mirror clamp boot
( M878 )

Black rubber replacement for perished original covers. Used on most unfaired models.



£3.95
More info  

Replacement chromed fork tubes to fit most models
( S063 )

Replacement front fork tubes available for the models listed.  Internal tube components need swapping from original to replacement tubes which involves grinding the end of the original tube.. Triumph have used Kayaba and Showa as suppliers for forks. We stock seals and fork bushes. State model and vin number when ordering please. Popular models in stock, others to order. New fork bushes need fitting when fitting new tubes as the original bushes can get distorted taking the forks apart. Price per tube. Made in UK.





£99.00
More info  

Steering Head Bearing Set 675, 800, 1050
( S315 )

Taper roller steering head bearing set and seals to fit 1050 Sprint ST, 1050 Tiger, 800 Tiger, Tiger XC, Daytona 675 and Street Triple. All Balls brand.



£29.00
More info  

Replacement fork seals (priced per pair)
( S495 )

Top quality fork oil seals for 41 mm forks with double lipped spring sealing to fit Bonneville 800/865, T100, Scrambler, Thruxton and America. Also fits the upside down forks used on the 675 Daytona and 675 Street Triple. This style of seal is used on most original equipment high end front suspension legs now. The extra spring on the outer side of the seal mimimises the risk of road debris entering and damaging the inner oil seal section.



£10.95
More info  

Fork Dust Seals 41 mm
( S637 )

Fork dust seals to fit 41 mm Showa forks. Fits Bonneville 800/865, T100, Thruxton, Scrambler, America, Speedmaster. Also fits the upside down forks used on the  675 Daytona and 675 Street Triple. Sold as a pair.



£12.95
More info  

Gear Change Shaft Oil Seal
( TA737 )

Outer oil seal on the gear change shaft on vitually all Triumph models. The existing seal can be very carefully hooked out and a new seal fitted. On models with a removable cover it's better to remove the cover to do the job. When fitting the seal back onto the splined gear shaft, it's good to cover the spline with tape to protect the seal inner.

Fits: TT600, Speed Four, 600/650 Daytona, 750/900 Trident, 900/1200 Trophy, 750/900/1000/1200 Daytona, 750/900 Speed Triple, Sprint 900, Sprint Sport, Sprint Executive, T509, 955/1050 Speed Triple, 955/1050 Sprint ST, 955 Sprint RS, Tiger 900/955/1050, Thunderbird 900, Thunderbird Sport, Adventurer, Legend TT.  Fits all the Bonneville range up to VIN 372312, Bonneville, T100, Thruxton, Scrambler, Speedmaster and America.



£4.30
More info  

Gear Change Shaft Seal. 675, 800, 1050, 1215 Replaces Triumph T3600088
( TA738 )

Gear change shaft seal used on all more recent and current models. Replaces Triumph T3600088

Fits: America (EFI from VIN 372713), Bobber, Bonneville& SE (from VIN  372713), T120, Daytona 675, 675R, Scrambler EFI (from VIN 372713), Street Triple 675, Street Triple 765 R, RS, S, Street Twin, Thruxton 900 EFI (from VIN 372713), Thruxton, Thruxton R, Thunderbird Storm, Tiger 1200 Explorer all, Tiger 800 all, Trophy 1215, SE

 



£3.25
More info  

Gearbox Output seal 675
( TA741 )

Output seal to fit all 675 and 800 models. 35mm x 62mm x 5mm 



£5.95
More info  

Seal for cam cover screw (Black) twin lip
( TA864 )

Engine cam cover screw seals used on all models (see note on Bonneville air cooled range below). Known as Dowty or bonded seals. This latest version has x 2 lips on the inside of the seal. 

This seal fits all models Triumph have made and replaces Triumph T1260309

Fits the Bonneville air cooled range before VIN 456550. For Bonneville, T100, Thruxton, America and Speedmaster only after VIN  456550 see part number TA865.



£1.99
More info  

Stick Ignition Coil 675 and 800 models
( Z132 )

Replacement ignition coil to fit all 675 Daytona, Street Triple, 800 Tiger and 800 Tiger XC



£59.00
More info  

NGK CR8EK and CR9EK spark plug
( Z276 )

Original equipment NGK CR8EK and CR9EK twin electrode spark plug to fit TT600, Speed Four, 600/650675 Daytona,  675 Street Triple, 675 Street Triple R, Tiger 800, Tiger 1050, Speed Triple 1050, 955 Speed Triple from vin 141872, Daytona 955 from vin 132513, Sprint RS/ST from vin139277





£8.99
More info  

Front Brake Switch all models
( Z303 )

Original front brake switch made by Alps Electrical Co, Japan to fit all Nissin front brake master cylinders except only the radial brake models. 

Fits: Adventurer, America, Bonneville 800/865, T100, SE, Legend TT, Rocket III, Classic, Roadster, Touring, Scrambler, Speed Four, Speed Triple 750/900, Speed Triple T509, Speed Trilpe 955, Speed Triple 1050 up to VIN 461331,  Speedmaster, Sprint 900, Sprint Sport, Sprint Executive, Sprint St 955, Sprint RS, Sprint ST 1050, Sprint GT, Street Triple, Thruxton, Thunderbird 900, Thunderbird Sport, Thunderbird 1600/1700. Thunderbird Storm, Tiger 800, Tiger 800XC, Tiger 900, Tiger 955, Trident 750/900, Trophy 900/1200, TT600   



£11.95
More info  

Front Brake Switch all models
( Z303 )

Original front brake switch made by Alps Electrical Co, Japan to fit all Nissin front brake master cylinders except only the radial brake models. 

Fits: Adventurer, America, Bonneville 800/865, T100, SE, Legend TT, Rocket III, Classic, Roadster, Touring, Scrambler, Speed Four, Speed Triple 750/900, Speed Triple T509, Speed Trilpe 955, Speed Triple 1050 up to VIN 461331,  Speedmaster, Sprint 900, Sprint Sport, Sprint Executive, Sprint St 955, Sprint RS, Sprint ST 1050, Sprint GT, Street Triple, Thruxton, Thunderbird 900, Thunderbird Sport, Thunderbird 1600/1700. Thunderbird Storm, Tiger 800, Tiger 800XC, Tiger 900, Tiger 955, Trident 750/900, Trophy 900/1200, TT600   



£11.95
More info  

Flasher relay 2 pin(including LED) Daytona 675, Street Triple Tiger 800
( Z423 )

Replacement 2 pin/connector flasher relay will work with original lamps (which have 10w bulbs). This unit is also excellent with most LED indicators. Unlike original incandescent bulbs, LED lamps are polarity sensitive.

Fits Daytona 675, Street Triple 675,Tiger 800, Tiger XC and Bonneville range with 2 pin relay fitted.



£12.00
More info  

Cam Chain Tensioner Spring 675 Daytona and Street Triple (Silver Coloured Tensioner)
( Z587 )

Replacement Cam Chain Tensioner Spring Kit - Triumph Street Triple, Street Triple R and Daytona 675

New Replacement Cam Chain Tensioner Spring complete with copper sealing washer for use in all Silver Coloured 675 cam chain tensioner housings.

To check how much your cam chain tensioner spring may have compressed, a new Triumph spring measures 60mm in length.  Replacement of the spring is a much more cost effective option than replacing the complete tensioner assembly. 

Replacement of the spring requires only the 10mm hexagon headed bolt to be removed and the spring can then be replaced.  A very simple job.

  Fits: Daytona 675 up to VIN 381274 (last six digits of chassis number)

          Street Triple and Street Triple R up to VIN 493832

         Street Triple R models between VIN 503519 and 508231



£12.95
More info  

Cam Chain Tensioner Spring 675 Daytona, Street Triple, Tiger 800 and Explorer
( Z589 )

Replacement Cam Chain Tensioner Spring - Triumph Street Triple, Street Triple R, Daytona 675, Tiger 800 and Tiger 800XC

New Replacement Cam Chain Tensioner Spring for use in Black Coloured Hydraulic cam chain tensioner housings used on 675 Daytona and Street Triple after VIN 493832, Tiger 800 and Tiger 800XC

Also used on the Street Triple R after VIN 493832 apart from VIN 503519 to 508231 which have the silver coloured adjuster fitted.

To check how much your cam chain tensioner spring may have compressed, a new Triumph spring measures 35mm in length.  Replacement of the spring is a much more cost effective option than replacing the complete tensioner assembly.

With this style of tensioner, it has to be removed to fit a new spring. There are x 2 spring clips on these tensioners. The rear spring in the tensioner slot if pulled together will allow the plunger to compress or be completely removed to change the spring.The front clip is used to hold the plunger fully in for reassembly. When the plunger is compressed, the front clip can be pulled together with long nose pliers to locate in the groove near the tip of the plunger.



£11.95
More info  

Plastic Fairing Panel Fasteners 675 Daytona
( Z840 )

x 10 plastic fairing fasterners to fit Daytona 675.



£5.95
More info