Show All

Show All

Tiger 800 & XC



Contact Us For Details



Contact Us For Details



Contact Us For Details



Contact Us For Details

BRAKE PAD INFORMATION
( B001 )

BRAKE PADS - We stock organic (Armstrong), Semi-sintered (Nissin NS - see picture left) and fully sintered (DP and Nissin ST - see picture left) brake pads. Organic pads are resin bonded, kind to the discs, generally quieter and fine for general road use. Sintered pads are made from metal particles put under pressure and heat, offer the best stopping power, but also cause the most rotor wear and can make the most noise. Virtually all original equipment pads are now sintered. They are also the least affected by adverse conditions and are the pad to choose for high speed and track days. Sintered pads can feel 'grabby' and may lack 'feel' at the lever. Semi-metallic pads fall right in the middle for durability and performance. A trade off between sintered and organic, they still stop well, cause less rotor wear with better lever feel than sintered metallic pads and normally make less noise.

Nissin brake pad compound chart shown left.



Contact Us For Details

Front Brake Master Cylinder Seal kit 14mm
( B005 )

Rebuild kit to fit Nissin 14mm bore front brake master cylinders,

Fits: Daytona 600/650, Daytona T595, 955 Daytona, Rocket III, Classic, Roadster, Speed Four, Speed Triple T509, 955 Speed Triple, 1050 Speed Triple to VIN  461331,   750/900 Trident, Sprint 900 and Trophy 900 up to vin 9082, 955 Sprint ST, 955 Sprint RS, 1050 Sprint ST (up to vin 274425) some fuel injected models have  been retrospectively fitted with 5/8" bore master cylinders to reduce lever travel -check before ordering). Street Triple, Sprint 900 and Trophy 900 up to vin 9082, TT600, Tiger 800, Tiger XC, Tiger 900 (carburettor model)



£24.95
More info  

Rear Brake Master Cylinder Rebuild Kit
( B010 )

Rebuild kit for all Triumph (Nissin) rear brake master cylinders.

Fits America, Bonneville 800/865, T100, 600/650/675/750/900/955/1000/1200 Daytona, 750/900 Trident, 750/900/955/1050 Speed Triple, 900/1200 Trophy, Scrambler, Speed Four, Speemaster, Street Triple, Thunderbird 900, Legend, Adventurer, Thunderbird Sport, Sprint 900, Sprint Sport, Sprint Executive, Sprint ST 955/1050, Sprint GT, 955 Sprint RS, Street Triple, Tiger 800/900/955/1050, Tiger 800, Tiger XC, TT600



£26.95
More info  

Rear Brake Master Cylinder seal Kit 1/2
( B011 )

Most Triumph produced have14 mm bore rear master cylinder size and use seal kit B010, but a few have 1/2 " to change the hydraulic pedal/caliper ratio.  If your bike is listed below check the size (it's cast into the side of the master cylinder) before ordering either this 1/2 " or Product B010 the 14 mm kit.

Fits, Bobber, Rocket III, Classic, Roadster, Tiger 800, XC, XR



£27.50
More info  

Seal set 2 piston calipers
( B057 )

27mm caliper seals used on all 2 piston calipers fitted to the Triumph range. These are genuine Nissin seals. The kit contains seals to repair x 1 caliper (4 seals). When fitted correctly in a clean groove, there is a smooth action of the piston with no tying up on the dust seal. After cleaning out any corrosion in the the dust seal groove, always use silicone or rubber grease when fitting.  Made in Japan.

Fits front and rear on:

Bonneville, T100, America, Speedmaster, Scrambler, Street Cup, Street Scrambler, Thruxton,Thunderbird 900, Thunderbird Sport, Legend TT, Adventurer,Trident 750/900, Tiger 900, Tiger 955, Trident Sprint (up to VIN 9082), Trophy 900 (upto VIN 9082), Trophy 1200 (up to VIN 4901)

Fits front only on

Tiger 800, Bobber, T120,

Fits rear on

Daytona 750/900/1000/1200, Daytona T595, Daytona 955, Speed Triple 750/900, Speed Triple T509, Speed Triple 955, 1050, Speed Triple R, S, Sprint ST 955, Sprint ST 1050, Sprint RS (single sided swinging arm), Tiger Explorer, Tiger Sport, Trophy 1215, SE, Trophy 900/1200, Sprint 900, Sprint Executive, Sprint Sport

 

 



£14.95
More info  

Earls brake hose to order
( B076 )

Earls stainless steel braided hose with neatly crimped stainless steel ends can be supplied to order for every model. We charge per hose with the choice of clear, black or no covering on the braiding. Popular models are stocked, others to order in approximately 3 or 4 days. Hoses are supplied with new copper banjo sealing washers. Recently produced models from Triumph are equiped with braided hoses (although the ends are plated not stainless steel) for reduced lever travel over earlier models with their reinforced rubber hoses. Custom lengths no problem. 

Earls stainless steel braided hose with stainless steel banjo crimped ends with new copper sealing washers. 600/650/750/800/865/900/955/1000/1050/1200/2300. Priced per hose. Please state model when ordering.





£29.95
More info  

Master cylinder piston outer boot (front)
( B225 )

Nissin front brake master cylinder outer boot. Fits all models with Nissin front brakes.

750/900 Trident, 600/650/750/900/955/1000/1200 Daytona, 750/900/955 Speed Triple, 900/955 Tiger, Thunderbird 900, Thunderbird Sport, Legend, Adventurer, 900/1200 Trophy



£4.95
More info  

Rear brake master cylinder boot Nissin.
( B226 )

Replacement master cylinder boot to fit all Nissin rear brake master cylinders. 



£4.95
More info  

2 piston Nissin caliper pin boots
( B274 )

Slider pin pair of boot/covers for the 2 piston Nissin calipers.

These fit the front calipers of the following: 750/900 Trident, 900 Sprint and Trophy (up to vin 9083), 1200 Trophy (up to vin 4902), Tiger 900, Tiger 900 (EFI), Tiger 955, Tiger 800, Tiger XC, Thunderbird 900, Legend, Thunderbird Sport, Adventurer

Fit the rear caliper of the following: 750/900 Trident, 900/1200 Trophy, 750/900 Speed Triple, 750/900/1000/1200 Daytona, Tiger 900 (carburettor model), 955 Daytona, 955 Speed Triple, T595, T509, 1050 Speed Triple, 1050 Tiger, Tiger 900 (EFI), Tiger 955,  Tiger 800, Tiger XC, Tiger Explorer, 955 Sprint ST, 1050 Sprint ST, Sprint GT, 955 Sprint RS (single sided swinging arm model), Bonneville 800/865, T100, Thruxton, SE, Scrambler, America, Speedmaster, Thunderbird 900, Thunderbird Sport, Legend, Adventurer



£8.95
More info  

Rear brake master cylinder push rod
( B279 )

Rear brake master cylinder rod with a choice of 52 mm, 45 mm or 38 mm of 8 mm x 1.25 pitch thread. This will fit many models and the thread can be cut for most models to shorten to the required length. 

Thunderbird 900, Legend, Adventurer, Thunderbird Sport, T595/955/600/650 Daytona, T509/955/1050 Speed Triple, 955/1050 Sprint ST, 955 Sprint RS, 955/1050 Tiger





£16.00
More info  

Brake bleed screw covers
( B286 )

x 3 rubber bleed screw covers.



£1.95
More info  

Rubber grease sachet
( B291 )

Use a light coating of rubber grease when replacing brake caliper seals. Sachet contents 5g.



£1.75
More info  

Brake paste
( B292 )

Brake paste, ideal for brake pad pin threads.



£1.95
More info  

Brake Banjo Bolt Stainless Steel (Single)
( B429 )

Single banjo width Earl's stainless steel brake banjo bolt for most application where x 1 hose is fitted.

M10 x 1.25 pitch thread.



£4.95
More info  

Brake Banjo Bolt Stainless Steel (Double)
( B430 )

Double width banjo stainless steel bolt for x 2 hose connection. Examples are front brake splitter on 3 and 4 cylinder carburettor models.

M10 x 1.25 pitch thread.



£5.49
More info  

Brake Banjo Annealed Copper Washers 10 mm
( B432 )

Original style copper washer 10 mm bore, 15.70 outer diameter and 1.20 mm thick. Pack size 10 pieces. Made in USA.



£3.95
More info  

27mm caliper piston and seals (Stainless Steel)
( B436 )

Stainless steel caliper piston 27 mm diameter and 31 mm long with seals for x 1 caliper (x 2 pistons and x 4 seals). These are not genuine Nissin parts.

Fits front and rear calipers on Thunderbird 900, Legend, Thunderbird Sport, Adventurer, 750/900 Trident, 900/955 Tiger, Bonneville, T100, Thruxton, America, Speedmaster, SE, Scrambler, Trophy 900 and Sprint 900 up to vin 9083, Trophy 1200 up to vin 4902

Fits rear caliper only on 750/900/1000/1200 Daytona, 955 Daytona (single sided swinging arm model), 750/900/955/1050 Speed Triple, 900 Sprint Sprint Sport, Sprint Executive, 955/1050 Sprint ST, Sprint RS (single sided swinging arm), Sprint GT, Tiger 1050, Tiger 1050 SE, Trophy 900 and Sprint 900 from vin 9084, Trophy 1200 from vin 4903

Fits front caliper Tiger 800, Tiger XC, Street Triple 675,



£44.95
More info  

27mm caliper piston and seals (Stainless Steel)
( B436 )

Stainless steel caliper piston 27 mm diameter and 31 mm long with seals for x 1 caliper (x 2 pistons and x 4 seals). These are not genuine Nissin parts.

Fits front and rear calipers on Thunderbird 900, Legend, Thunderbird Sport, Adventurer, 750/900 Trident, 900/955 Tiger, Bonneville, T100, Thruxton, America, Speedmaster, SE, Scrambler, Trophy 900 and Sprint 900 up to vin 9083, Trophy 1200 up to vin 4902

Fits rear caliper only on 750/900/1000/1200 Daytona, 955 Daytona (single sided swinging arm model), 750/900/955/1050 Speed Triple, 900 Sprint Sprint Sport, Sprint Executive, 955/1050 Sprint ST, Sprint RS (single sided swinging arm), Sprint GT, Tiger 1050, Tiger 1050 SE, Trophy 900 and Sprint 900 from vin 9084, Trophy 1200 from vin 4903

Fits front caliper Tiger 800, Tiger XC, Street Triple 675,



£44.95
More info  

Piston Set 1/2 Nymfron
( B446 )

Set of x 4 Nissin caliper pistons (x 2  30 mm pistons and x 2  34 mm Nymfron low friction pistons). Can be fitted to any Nissin/Triumph 4 piston caliper (not Brembo). Nissin only coat the 34 mm to reduce friction/drag. This was done to help eliminate the long lever travel problems.



£54.00
More info  

Rear Caliper Piston and Seal kit 38 mm (pattern)
( B448 )

Pattern caliper piston and seals to fit rear calipers on all sports twin sided swinging arm models.

Fits TT600, Speed Four, Daytona 600, Daytona 650, Daytona 675, Street Triple, Daytona 955 (twin sided swinging arm model), Tiger 800, Tiger XC,



£24.00
More info  

Brake pad pin rear Nissin Tiger 800, TT600, Daytona 955
( B609 )

Rear brake caliper pad pin and screw cover fits Nissin rear calipers on:

Daytona 600/650, 675 Daytona to VIN 564947, Daytona 995 (twin sided swinging arm model only), Speed Four, Street Triple and Street Triple R up to VIN 560476, Tiger 800, XC, XCA, XCx, XR, XRT, XRx, TT600



£7.99
More info  

Disc Bolt 10 mm shoulder 30 mm long
( B810 )

Stainless steel disc bolt M8 x 1.25 mm pitch. Thread length 30 mm including 10 mm shoulder.

Fits front and rear on:

Bobber, Bonneville T120, Daytona 750/900/1000/1200, Daytona 600/650, Daytona 675, Daytona 955 (twin sided swinging arm), Rocket III, Speed Four, 750/900 Speed Triple, Sprint 900, Sprint Executive, Sprint Sport, Sprint RS (twin sided swinging arm), Street Cup, Street Scrambler, Street Triple 675, Street Triple R, S RS, Thruxton R (liquid cooled), Tiger 800, Tiger 1050, 750/900 Trident, 900/1200 Trophy, TT600

Fits front only on:

Daytona T595, Daytona 955 (single sided swinging arm), Speed Triple 955/1050, Sprint RS (Single sided swinging arm), Sprint ST 955/1050,



£5.49
More info  

Brake pad Armstrong Bonneville, Thunderbird 900, Tiger 800/955
( B902 )

Armstrong semi metallic brake pads.

Fits the front of the following: Bonneville, T100, Scrambler, Speedmaster, America, Thunderbird 900, Legend, Adventurer, Thunderbird Sport, Tiger 800, Tiger XC, Tiger 900 (injection), Tiger 955, 675 Street Triple (not R model)

Fits the rear of the following: Thunderbird 900, Legend, Adventurer, Thunderbird Sport, Tiger 900 (injection), Tiger 955 (up to vin 198874)

Supplied as 2 pads for x 1 caliper



£12.95
More info  

Brake pad Nissin Bonneville, Thunderbird 900, Tiger 800/955
( B903 )

Nissin NS semi metallic brake pads.

Fits the front of the following: Bonneville, T100, Scrambler, Speedmaster, America, Thunderbird 900, Legend, Adventurer, Thunderbird Sport, Tiger 800, Tiger XC, Tiger 900 (injection), Tiger 955, 675 Street Triple (not R model)

Fits the rear of the following: Thunderbird 900, Legend, Adventurer, Thunderbird Sport, Tiger 900 (injection), Tiger 955 (up to vin 198874)

Supplied as 2 pads for x 1 caliper



£34.25
More info  

Brake pad Armstrong Bonneville (rear), 955, 1050, 900 left front
( B911 )

Armstrong brake pads. Supplied as 2 pads for x 1 caliper.

Fits the rear of the following: Tiger Explorer, Bonneville, T100, Scrambler, America, Speedmaster. All single sided models T595 Daytona, 955 Daytona, T509, 955 Speed Triple, 1050 Speed Triple, 955 Sprint ST, 1050 Sprint ST, Sprint 955 RS (single sided swinging arm models), Trophy 1215 & SE, Tiger Sport

Fits the front left side of the following: 750/900 Trident, 900 Trident Sprint and Trophy 900 up to vin 9082, Trophy 1200 up to vin 4901



£12.95
More info  

Brake pad rear Nissin 675 Daytona, Street Triple, Tiger 800, TT600
( B914 )

Nissin NS semi metallic rear brake pad.

Fits the rear of the following: TT600, Speed 4, Daytona 600, Daytona 650, Daytona 675, Street Triple, Street Triple R, Daytona 675 R, Daytona 955 (twin sided swinging arm), Tiger 800, Tiger XC,



£32.95
More info  

Rear Brake Pads 675, TT600, Tiger 800, Street Triple
( B915 )

Nissin NS semi metallic rear brake pad.

Fits the rear of the following: TT600, Speed 4, Daytona 600, Daytona 650, Daytona 675, Street Triple, Street Triple R, Daytona 675 R, Daytona 955 (twin sided swinging arm), Tiger 800, Tiger XC,



£12.95
More info  

Wheel Bearing (Koyo) and dust seals Tiger 800, Tiger 955, TT600
( BE078 )

Japanese Koyo wheel bearings (sold as a pair with dust seals for x 1 wheel). Dust seals may not fit all models.

Fits FRONT WHEEL: all Rocket 3, Thunderbird 1600/1700, Tiger 800 range, Trophy 1215

Fits REAR WHEEL: Bobber, Bonneville T120, Daytona 600/650, Daytona, 675, Daytona 955 (dual sided swinging arm), Tiger 800, Tiger XC, Tiger 1050, Tiger 955 (cast wheel model), all Rocket 3, Speed Four, Speedmaster, Street Scrambler, Street Triple 675, Street Triple 765, TT600, Daytona 600/650, Sprint RS (twin sided swinging arm), Tiger 1050 , Thunderbird 1600/1700, Thruxton, Thruxton R



£23.95
More info  

Sprocket Carrier Koyo Bearing and Seal Tiger 800, 955
( BE082 )

Japanese Koyo sprocket carrier (cush drive) bearing and seal to fit:

Tiger 800, Tiger 800 XC

Tiger 955 (cast wheel)

Bonneville, T100, America, Speedmaster, Thruxton, Scrambler

TT600, Speed Four, Daytona 600/650

955 Sprint RS (twin sided swinging arm)

955 Daytona (twin sided swinging arm)

675 Daytona, Street Triple

 



£9.95
More info  

Valve Shims 7.5 mm 1.80 - 2.95
( BE704 )

7.5 mm valve shim.

Fits: Daytona 600/650, Daytona 675, Daytona 675 R, Speed Four, TT600, Street Triple, Street Triple R, Tiger 800, Tiger 800 XC, Tiger XR.

 





£3.95
More info  

Adjustable Front brake lever 600/650/955 Daytona and 955 Speed Triple.
( C354 )

Correct shape replacement front brake lever to fit TT600, Speed Four, 600/650 Daytona, Street Triple 675, Scrambler, Thruxton, SE and Bonneville from vin 380777, T509 Speed Triple, T595/955 Daytona, 955 Speed Triple, 1050 Speed Triple up to vin 333179 and 1050 Tiger.

Will also fit to upgrade to adjustable on Bonneville, T100, America and Speedmaster.



£16.95
More info  

Front brake Tiger Explorer, Tiger 800
( C356 )

Front brake lever as fitted to Street Twin, Bonneville T120, Bonneville T120 Black, Thruxton (Liquid cooled), Trophy 1215, Trophy 1215 SE, Tiger 800, Tiger XC, XCA, XRT, Tiger 1050, Tiger Sport and Tiger Explorer. Can be fitted to most of the Triumph non radial front brakes if desired. Alloy finish.



£14.95
More info  

Front brake Tiger Explorer, Tiger 800
( C356 )

Front brake lever as fitted to Street Twin, Bonneville T120, Bonneville T120 Black, Thruxton (Liquid cooled), Trophy 1215, Trophy 1215 SE, Tiger 800, Tiger XC, XCA, XRT, Tiger 1050, Tiger Sport and Tiger Explorer. Can be fitted to most of the Triumph non radial front brakes if desired. Alloy finish.



£14.95
More info  

Clutch cable 800 Tiger
( CC768 )

Clutch cable to fit all Tiger 800 models. Inner length 113 cm.Outer length 101 cm.

Fits:Tiger 800, 800XCA, 800XCx, 800XR, 800XRT and 800XRx.

 



£19.95
More info  

DID X-ring 525 chain and sprocket kit. Bonneville range/600/650/675
( CS151 )

DID VM2 X-ring gold chain and sprocket kit. Available for all Bonneville models, TT600, Speed Four, Daytona 675 and 675 Street Triple. Please state model when ordering. (525 chain size). Front/rear/chain length details given are for standard factory sizes. Other size choice no problem.  



£119.00
More info  

DID X-ring gold chain 525
( CS154 )

Original equipment DID VX/VM2 X-ring gold 525 chain. Fits, TT600, Speed Four, Daytoina 600/650, 675 Daytona, 675 Street Triple, 800 Tiger and Tiger XC.





£85.00
More info  

Tab Washer 675, 600 and 650 models
( CS173 )

Gearbox sprocket tab washer to fit: TT600, Speed Four, Daytona 600, Daytona 650, Daytona 675, Daytona 675R, Street Triple, Street Triple R, Tiger 800 and Tiger 800XC. Replaces Triumph T1180328



£3.95
More info  

675 and 800 Gearbox Sprocket (525)
( CS945 )

Gearbox sprocket to fit Daytona 675, Street Triple, Tiger 800 and Tiger XC. Sizes available  14, 15 , 16 and 17 teeth.   (525 chain size)





£15.00
More info  

Rear Sprocket 675 and 800 (525)
( CS946 )

Rear sprocket to fit Tiger 800, Tiger XC, Daytona 675 and Street Triple available  in 47, 49 and  50 teeth. (525 chain size)





£25.00
More info  

Chain Rivet Tool
( CS950 )

Replica DID chain rivet tool. This will push the rivet link together and neatly rivet the ends over. To separate an old chain or shorten a chain, grind the rivet ends one side of the link to be removed until the side plate is hit. Go slightly below the surface to be sure the rivetting is well ground away, then knock apart with a punch and hammer.



£39.95
More info  

Rear Disc 255 mm Sprint ST, Sprint RS, Bonneville, Thruxton
( D017 )

255 mm rear disc to fit Bonneville 800/865, T100, Thruxton, Scrambler, Sprint ST 955, Sprint ST 1050, Sprint RS and Tiger 800.  Available for models with and without ABS.





£79.00
More info  

Indicator left 1050 Speed Triple, 800 Tiger
( EL405 )

Left front or right rear indicator complete with wiring which connects into original Triumph connector on loom and correct stems as original.

Fits Street Triple 675, 800 Tiger, 800 Tiger XC, XRx, XCx, Daytona 675 from VIN 381275,1050 Tiger from VIN 48357 and Tiger Sport.



£19.95
More info  

Indicator right 1050 Speed Triple, 800 Tiger
( EL406 )

Right front or left rear indicator complete with wiring which connects into original Triumph connector on loom and correct stems as original.

Fits Street Triple 675, 800 Tiger, 800 Tiger XC, XRx, XCx, Daytona 675 from VIN 381275,1050 Tiger from VIN 48357 and Tiger Sport.



£19.95
More info  

Indicator Lens 675, 800, 1050
( EL407 )

Fits Street Triple 675, 800 Tiger, 800 Tiger XC, XRx, XCx, Daytona 675 from VIN 381275,1050 Tiger from VIN 48357 and Tiger Sport.



£4.95
More info  

Exhaust studs steel, all 3 cylinder models
( EX083 )

Set of 6 steel exhaust studs.  (M8 x 1.25 pitch thread both ends)  Approximately 38mm overall length. All  3 cylinder models.



£9.95
More info  

Exhaust header stainless steel studs (priced each)
( EX085 )

Stainless stud with copper plated flanged nut.

750/900 Trident, 900/1200 Trophy, 750/900/955/1050 Speed Triple, 750/900/955/1000/1200 Daytona, 900/955/1050 Tiger, 900 Thunderbird, Legend, Thunderbird Sport, Adventurer, 955/1050 Sprint ST, 955 Sprint RS



£3.95
More info  

Exhaust connector 800 Tiger
( EX356 )

Exhaust connector to fit race can to 800 Tiger models. Outlet size approximately 50.5mm.



£49.00
More info  

Exhaust Seal Silencer Entry 675/800/1050 T2202115
( EX680 )

Gauze exhaust seal on entry to silencer. 45 mm internal 51 mm external. Replaces Triumph T2202115

Fits: Daytona 675 (up to VIN 564947),, Sprint ST 1050, Sprint GT, Tiger 800 (all models), Tiger 1050, Tiger Sport, 1050 Speed Triple, Speed Triple R, Speed Triple S, Tiger Explorer (all models), 1215 Trophy and 1215 Trophy SE.



£5.95
More info  

Gear Change Rubber Thunderbird, Bonneville, Tiger 800
( F088 )

Gear change rubber to fit Thunderbird 900, Legend, Thunderbird Sport, Adventurer, Bonneville 800/865, T100, America, Speedmaster and Tiger 800, Tiger XC, Tiger XCX and Tiger XRX.



£2.95
More info  

Haynes Manual Tiger 800 Range
( H682 )

Haynes workshop manual for the Tiger 800 range. Specifically aimed at 2010 - 2014 Tiger and Tiger XC including ABS.



£19.99
More info  

Fuel Filler cap 600, 650, 675, 800, 955, 1050
( J017 )

Replacement filler cap and 2 keys.

Fits 600/650/675/955 Daytona, 955/1050 Speed Triple, Speed Four, Sprint ST 955, Sprint RS 955, Sprint ST 1050, 955/1050 Tiger, 675 Street Triple, Tiger 800, Tiger XC, T595, T509



£49.95
More info  

Fuel Connector O-Rings
( J183 )

Fuel connector  O-rings x 2 used on fuel injected models. These  O-rings are manufactured from Viton.

While ethanol mixed with petrol/gasoline is known to lower engine / tailpipe emissions, these blended fuels  increased permeation through plastic and rubber. Viton has excellent chemical resistance and helps resist these problems. When removing a fuel connector, make sure the clip is released and while separating keeping square at all times until fully apart.

Fits T595, T509, 955 Daytona, 955 Speed Triple, TT600, Speed Four, Sprint 995 ST, Sprint 995 RS, Tiger 900 (injected) and Tiger 955.



£1.90
More info  

Oil Filter OE Fits all Injected Models
( J185 )

Genuine Triumph oil filter fits all Bonneville (carburettor and EFI) and all Triumph models produced with fuel injection.

Fits: America, Bonneville 800/865, SE, T100, Bobber, T120, Daytona 600/650/675/955, T595, Rocket III, Classis, Roadster, Touring, Scrambler, Speed Four, Speedmaster, Speed Triple 955/1050, T509, Sprint ST 955/1050, Sprint RS, Street Cup, Street Scrambler, Street Triple 675/765, Street Twin, Thruxton 900/1200 R, Thunderbird 1600/1700, Sport, Storm, Tiger 800/900 EFI, 955, 1050, Sport, 1215 Explorer, Trophy 1215, TT600



£9.95
More info  

Oil filter wrench 955/1050/Bonneville range
( J187 )

Professional quality 3/8" drive or 19mm spanner size wrench for fitting and removal of genuine Triumph cannister oil filters on all Bonneville, Rocket 3, 600, 650, 675, 800, 955 and 1050  models.

 



£12.95
More info  

Sump plug washer 14 mm
( J189 )

x 4 sump plug washers to fit all models (expect a few models made in 1991-92 up to VIN 3926). Also fits Tiger Explorer final drive unit, 955 and 3/4 cylinder carburettor model oil cooler to hose joints.



£1.45
More info  

Sump Plug Bolt Magnetic
( J191 )

Sump plug bolt with magnetic insert to fit all models produced since 1994 (after approx. VIN  5000). M14 thread.  19 mm spanner size.



Contact Us For Details

Hilflofiltro Air Filter Tiger 800 Range
( J710 )

Hiflofiltro replacement air filter to all the Tiger 800 Range.



£13.95
More info  

Cam Cover Seal 675 and 800 all models
( K922 )

Cam cover seal and cam cover screw seal set to fit all Daytona 675, Street Triple 675 and Tiger 800 models.  Also fits: Street Triple S, Street Triple R and Street Triple RS 765 models. Fits all Street Triples from VIN 803572.



£24.95
More info  

Tiger 800 Lower Engine Cover Gaskets
( K935 )

Engine cover gaskets to fit all Tiger 800 models. Fits Tiger 800, 800XCA, 800XCx, 800XR, 800XRT and 800XRx.



£16.95
More info  

Tiger 800 rack
( L265 )

Tubular steel rack to fit Tiger 800 models. Manufactured by Renntec in UK.



£89.95
More info  

Replacement chromed fork tubes to fit most models
( S063 )

Replacement front fork tubes available for the models listed.  Internal tube components need swapping from original to replacement tubes which involves grinding the end of the original tube.. Triumph have used Kayaba and Showa as suppliers for forks. We stock seals and fork bushes. State model and vin number when ordering please. Popular models in stock, others to order. New fork bushes need fitting when fitting new tubes as the original bushes can get distorted taking the forks apart. Price per tube. Made in UK.





£99.00
More info  

Steering Head Bearing Set 675, 800, 1050
( S315 )

Taper roller steering head bearing set and seals to fit 1050 Sprint ST, 1050 Tiger, 800 Tiger, Tiger XC, Daytona 675 and Street Triple. All Balls brand.



£29.00
More info  

Replacement fork seals (priced per pair)
( S502 )

43 mm fork seals to fit Showa forks. Triumph for their 43 mm forks have used both Kayaba (55 mm outer diameter seal) and Showa (54 mm outer diameter seal) as their fork suppliers. Just state what bike you have when ordering. NOW WITH LATEST DOUBLE SPRUNG LIP DESIGN. These fit all Sprint ST 955, all Sprint RS and all Sprint ST 1050. They also fit (please check VIN numbers) Trophy900/1200, Trident, Tiger 800, XC, XCA, XCx, XR, XRT, XRx, Tiger 1050, Tiger Sport, Speed Triple 1050 up to VIN 461331 

Thunderbird, Adventurer and Legend after VIN 43510 and up to VIN 92814.  

Trophy after VIN 42275 except from VIN 96152 to VIN 98479.

1050 Speed Triple up to VIN 461331

Trident after VIN 44302.

Tiger 900 after VIN 43524

Sprint RS and ST 955

Sprint 1050, Sprint GT,

Tiger 1050 and Tiger 800 range.

Tiger 900 (injection) and 955 Tiger



£10.95
More info  

Gear Change Shaft Seal. 675, 800, 1050, 1215 Replaces Triumph T3600088
( TA738 )

Gear change shaft seal used on all more recent and current models. Replaces Triumph T3600088

Fits: America (EFI from VIN 372713), Bobber, Bonneville& SE (from VIN  372713), T120, Daytona 675, 675R, Scrambler EFI (from VIN 372713), Street Triple 675, Street Triple 765 R, RS, S, Street Twin, Thruxton 900 EFI (from VIN 372713), Thruxton, Thruxton R, Thunderbird Storm, Tiger 1200 Explorer all, Tiger 800 all, Trophy 1215, SE

 



£3.25
More info  

Gearbox Output seal 675
( TA741 )

Output seal to fit all 675 and 800 models. 35mm x 62mm x 5mm 



£5.95
More info  

Seal for cam cover screw (Black) twin lip
( TA864 )

Engine cam cover screw seals used on all models (see note on Bonneville air cooled range below). Known as Dowty or bonded seals. This latest version has x 2 lips on the inside of the seal. 

This seal fits all models Triumph have made and replaces Triumph T1260309

Fits the Bonneville air cooled range before VIN 456550. For Bonneville, T100, Thruxton, America and Speedmaster only after VIN  456550 see part number TA865.



£1.99
More info  

Stick Ignition Coil 675 and 800 models
( Z132 )

Replacement ignition coil to fit all 675 Daytona, Street Triple, 800 Tiger and 800 Tiger XC



£59.00
More info  

NGK CR8EK and CR9EK spark plug
( Z276 )

Original equipment NGK CR8EK and CR9EK twin electrode spark plug to fit TT600, Speed Four, 600/650675 Daytona,  675 Street Triple, 675 Street Triple R, Tiger 800, Tiger 1050, Speed Triple 1050, 955 Speed Triple from vin 141872, Daytona 955 from vin 132513, Sprint RS/ST from vin139277





£8.99
More info  

Front Brake Switch all models
( Z303 )

Original front brake switch made by Alps Electrical Co, Japan to fit all Nissin front brake master cylinders except only the radial brake models. 

Fits: Adventurer, America, Bonneville 800/865, T100, SE, Legend TT, Rocket III, Classic, Roadster, Touring, Scrambler, Speed Four, Speed Triple 750/900, Speed Triple T509, Speed Trilpe 955, Speed Triple 1050 up to VIN 461331,  Speedmaster, Sprint 900, Sprint Sport, Sprint Executive, Sprint St 955, Sprint RS, Sprint ST 1050, Sprint GT, Street Triple, Thruxton, Thunderbird 900, Thunderbird Sport, Thunderbird 1600/1700. Thunderbird Storm, Tiger 800, Tiger 800XC, Tiger 900, Tiger 955, Trident 750/900, Trophy 900/1200, TT600   



£11.95
More info  

Front Brake Switch all models
( Z303 )

Original front brake switch made by Alps Electrical Co, Japan to fit all Nissin front brake master cylinders except only the radial brake models. 

Fits: Adventurer, America, Bonneville 800/865, T100, SE, Legend TT, Rocket III, Classic, Roadster, Touring, Scrambler, Speed Four, Speed Triple 750/900, Speed Triple T509, Speed Trilpe 955, Speed Triple 1050 up to VIN 461331,  Speedmaster, Sprint 900, Sprint Sport, Sprint Executive, Sprint St 955, Sprint RS, Sprint ST 1050, Sprint GT, Street Triple, Thruxton, Thunderbird 900, Thunderbird Sport, Thunderbird 1600/1700. Thunderbird Storm, Tiger 800, Tiger 800XC, Tiger 900, Tiger 955, Trident 750/900, Trophy 900/1200, TT600   



£11.95
More info  

Flasher relay 2 pin(including LED) Daytona 675, Street Triple Tiger 800
( Z423 )

Replacement 2 pin/connector flasher relay will work with original lamps (which have 10w bulbs). This unit is also excellent with most LED indicators. Unlike original incandescent bulbs, LED lamps are polarity sensitive.

Fits Daytona 675, Street Triple 675,Tiger 800, Tiger XC and Bonneville range with 2 pin relay fitted.



£12.00
More info  

Chaneover Relay (starting relay) Bonneville, 955 ST, 1050 ST,
( Z424 )

Uprated 40A changeover relay used on starting to switch the lights off.

Fits all the Bonneville range up to VIN 317247, 955 Sprint ST, 955 Sprint RS, Tiger 800 and 1050 Sprint ST



£7.95
More info  

Cam Chain Tensioner Spring 675 Daytona, Street Triple, Tiger 800 and Explorer
( Z589 )

Replacement Cam Chain Tensioner Spring - Triumph Street Triple, Street Triple R, Daytona 675, Tiger 800 and Tiger 800XC

New Replacement Cam Chain Tensioner Spring for use in Black Coloured Hydraulic cam chain tensioner housings used on 675 Daytona and Street Triple after VIN 493832, Tiger 800 and Tiger 800XC

Also used on the Street Triple R after VIN 493832 apart from VIN 503519 to 508231 which have the silver coloured adjuster fitted.

To check how much your cam chain tensioner spring may have compressed, a new Triumph spring measures 35mm in length.  Replacement of the spring is a much more cost effective option than replacing the complete tensioner assembly.

With this style of tensioner, it has to be removed to fit a new spring. There are x 2 spring clips on these tensioners. The rear spring in the tensioner slot if pulled together will allow the plunger to compress or be completely removed to change the spring.The front clip is used to hold the plunger fully in for reassembly. When the plunger is compressed, the front clip can be pulled together with long nose pliers to locate in the groove near the tip of the plunger.



£11.95
More info  

Cam Cover Seal Set of 8 (3 Cylinder Carburettor Engines)
( Z701 )

8 cam cover screw seals to fit all 3 cylinder carburettor models. These bonded seals were known originally as Dowty seals.

TA864 x 8



£14.95
More info